Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pinewood, FL
Gate installation in Pinewood means building for salt air, hurricane wind loads, and a housing stock that runs from 1950s chain-link to newer impact-rated aluminum systems. We’re Miami Gardens Gate Repair, and we work exclusively on gates: automatic swing and slide systems, driveway gates, perimeter gates, and the operators that drive them. We know the 33167 corridor and what it does to metal over time. If you need a gate built, repaired, or automated in Pinewood, call us at (855) 382-0732.
Why Pinewood Homes Are Different
Pinewood is a small, established pocket of mid-century single-family homes, mostly built between the 1950s and 1970s. The gate hardware on these lots runs the gamut: original chain-link frames with rusted post anchors, wrought iron that’s been repainted over corrosion more than once, and aluminum driveway gates that looked clean until the salt air got into the welds. On renovated lots, we see newer custom impact-rated systems, but those come with their own Pinewood-specific problem: the electronics are rated for wind, yet the installers often didn’t account for how fast salt corrosion travels through cheap brackets and fasteners.
Pinewood’s 33167 corridor sits in one of South Florida’s most salt-and-storm-exposed zones. A gate that lasts a decade inland often fails here in three or four years. High humidity works on hinges and latch plates year-round. June through November, hurricane season brings wind-load stress that bends hinges and shears post anchors, frequently without the homeowner noticing until the next good breeze catches the gate. That’s why local repair conversations revolve around corrosion resistance, impact-rated hardware, and anchoring that meets Miami-Dade wind-load standards, not cosmetic upgrades.
Styles & brands we work with
Our Main Pinewood Services
Most Pinewood homeowners call us for one of two reasons: a gate that won’t close properly, or an electric gate that won’t respond at all. Both live here as full service pages, and here’s what each one means in this neighborhood.
Gate Repair in Pinewood
Gate repair in Pinewood usually starts with rust. Hinges seize, post anchors corrode, and weld points fail in ways that inland technicians rarely see. We handle the full range: re-hanging a sagging driveway gate, replacing bent or rusted hinges, cutting out and re-anchoring posts, and straightening frames stressed by wind load. Because we work on gates exclusively, we carry the right hardware for mid-century chain-link, wrought iron, and aluminum systems alike. For the full breakdown of what we fix and what it costs, see our dedicated Gate Repair in Pinewood page.
Electric Gate Repair in Pinewood
Electric gate failure in Pinewood often traces back to moisture. Control boards corrode, loop detectors get flaky after heavy rain, and motors fitted without proper weather sealing fail early. We diagnose the system, not just the symptom: testing the operator, the safety edges, the power run, and the access system together. Whether it’s a LiftMaster that stopped responding or a Ghost Controls operator that opens but won’t close, our technicians know the board architecture across brands. Details on diagnostics, common failures, and pricing are on our Electric Gate Repair in Pinewood page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pinewood
New gate installation in Pinewood isn’t the same job it is twenty miles inland. The metal has to survive salt-laden air, the anchoring has to survive wind load, and the automation has to survive June-through-November storms. Whether you’re replacing an aging chain-link gate on a 1960s lot or putting in a custom impact-rated driveway system on a renovated home, we build for this environment first. The goal is a gate that still swings true and operates cleanly after several hurricane seasons, not one that looks good for the first year. You can see our full installation capability on our Gate Installation service hub.
Automatic Gate Installation
Signs you need it
A manual gate you’re tired of opening in the rain, or a new build where the gate needs to work with an intercom, keypad, or vehicle sensor.
What it costs in Pinewood
Automatic gate installation in Pinewood typically runs $2,800 to $7,500, depending on whether it’s a single swing arm, a slide operator, or a full system with loop detectors and access control.
How we do it
We set the posts and mount the operator to handle Miami-Dade wind load, run the power and control wiring, install detection loops and safety edges, then program the travel limits, force settings, and any remotes or keypads.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging beyond adjustment, or built before impact-rated hardware was standard in this part of Pinewood.
What it costs in Pinewood
A new driveway gate installation in Pinewood includes the gate fabrication, posts, hardware, and automation, and typically lands between $1,900 and $8,400 depending on material, width, and automation level.
How we do it
We measure the opening, set posts below the Florida frost line with proper concrete, hang the gate with sealed bearings, then install and program the operator, safety edges, and any access controls you choose.
Sliding Gate Installation
Signs you need it
Your lot has a wide opening or a driveway slope that makes a swing gate impractical, or you need a commercial-style slider for a multi-unit property.
What it costs in Pinewood
Sliding gate installation in Pinewood typically runs $3,200 to $8,500, with the higher end covering long spans, heavy-duty track, and dual operators.
How we do it
We pour the track foundation, set the gate on sealed rollers, mount the operator with proper chain or rack drive, install safety loops and edge sensors, and test the full assembly under repeated cycles.
What Gate Installation Costs in Pinewood
| Item | Typical range in Pinewood |
|---|---|
| Automatic gate installation (full system) | $2,800 – $7,500 |
| Driveway gate installation (fabricated to fit) | $1,900 – $8,400 |
| Sliding gate installation (residential or light commercial) | $3,200 – $8,500 |
Prices in Pinewood run higher than inland Miami-Dade because of impact-rated hardware requirements, corrosion-resistant fasteners, and the extra labor of anchoring posts deep enough to hold under wind load. Every job gets a written price before work starts, so the number we quote is the number you pay.
How long does gate installation take in Pinewood?
Most residential gate installations in Pinewood take one to two days on site. If the job requires a poured track foundation or custom fabrication, expect the project to run three to five days total.
Can you install an automatic gate on a 1960s Pinewood property?
Yes. The main challenge is the old post anchors and thin metal frames. We typically replace the posts and hardware first, then mount the operator on a reinforced base plate so it’s stable for years, not months. Call (855) 382-0732 for a free measure and quote.
Brands We Service in Pinewood
We’re factory-familiar with BFT, Linear, Viking, and Ghost Controls operators, among others. Because we work across brands side by side, we can usually match the right replacement board or motor to what’s already on your Pinewood property without pushing a full unit swap. Parts arrive fast, and we keep common boards and sensors in local stock to cut turnaround. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pinewood, FL
| Service | Typical range in Pinewood |
|---|---|
| Automatic gate installation (full system) | $2,800 – $7,500 |
| Driveway gate installation (fabricated to fit) | $1,900 – $8,400 |
| Sliding gate installation (residential or light commercial) | $3,200 – $8,500 |
| Gate repair, basic (hinge, latch, alignment) | $160 – $425 |
| Gate repair, structural (post reset, frame welding) | $420 – $1,100 |
| Electric gate repair (motor, board, loop, access) | $225 – $850 |
| Full operator replacement | $900 – $2,500 |
| Control board replacement | $300 – $800 |
What pushes a Pinewood job higher than the midpoint: deep corrosion requiring post replacement, impact-rated hardware upgrades, and operator failures from water intrusion that need a full motor swap. What you’ll never get from us is an invoice bigger than the number we agreed on before the work started.
Neighborhoods We Serve in Pinewood
We cover all of Pinewood’s 33167 corridor, including the older residential streets off the main arteries and the renovated lots with newer custom gates. Response time across the area is typically same-day for urgent gate or electric gate repairs, with installation work scheduled in advance.
- North Pinewood residential blocks
- Streets east of NW 12th Avenue
- Lots near the 33167 industrial edge
- Renovated homes along the western corridor
Service Area – Cities Near Pinewood
Our service area covers Pinewood and the surrounding neighborhoods. We work regularly in Westview, FL, Bunche Park, FL, Opa-locka, FL, and Gladeview, FL, handling the same salt-air and wind-load issues that define gate work across this stretch of Miami-Dade.
Serving Pinewood, FL — Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pinewood
For urgent repairs like a gate stuck open or an operator that won’t respond, we aim for same-day service in Pinewood. Standard repairs and installations are scheduled on a set day and time, with the price confirmed before any work starts.
Some Pinewood streets and renovated developments enforce gate height, material, and finish rules, and a few require board approval before installation. Bring us any HOA documentation you have and we’ll build or repair within those terms. Call (855) 382-0732 to talk it through.
Yes. We’re a gate-only trade, so the technician who checks your hinges can also test your control board, loop detector, and access system in the same visit. You don’t need separate contractors for the physical gate and the automation. Call (855) 382-0732 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinewood Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Gilbert Flores"Showed up when they said they would. That's most of the battle."
— Rosa Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Andres Salazar