Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miramar, FL
Gate installation in Miramar usually means one of two jobs: replacing a rusted 1970s-era aluminum driveway gate that’s finally given out, or retrofitting an original wrought-iron gate with an automatic opener. The 33023 ZIP code is packed with single-story ranch homes built between 1970 and 1989, and many of those gates are still the originals. Salt air, hurricane seasons, and a high water table have taken their toll on posts, hinges, and frames. We handle the full replacement and automation scope, from the first measurement to the final control board programming. Call us at (855) 382-0732 when you’re ready for a written estimate.
Why Miramar Homes Are Different
Miramar’s 33023 ZIP code, the stretch along the West Park border, is one of South Florida’s tightest clusters of 1970s and 1980s ranch homes still holding onto their original driveway gates. That age and density creates a repair pattern you don’t see in newer developments: oxidized aluminum posts at the ground line, welded steel hinges that have corroded through after four decades of humidity, and gates that have sagged because the sandy soil under the post footing finally shifted. When a homeowner tells us the gate “just needs a hinge,” what we often find on site is a rotted post anchor that has to be cut out, reset in fresh concrete, and only then re-hung.
Subtropical humidity and salt air from the Atlantic and the coastal waterways accelerate rust on every exposed metal surface. Summer sun bakes powder coating until it chalks and peels, which then exposes the raw metal underneath. Hurricane season, June through November, brings wind loads that test every weld and every roller track. Homes that survived a close pass from a storm often need gate realignment within weeks, not because the gate was built badly, but because the posts moved just enough to bind the hinges. We approach Miramar gate work expecting these conditions, which means we check the post footing before we quote a hinge replacement, and we use corrosion-resistant hardware as standard practice.
Styles & brands we work with
Our Main Miramar Services
Most Miramar homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric system that’s stopped responding. Both are covered below, and each has its own dedicated Miramar page with full pricing detail.
Gate Repair in Miramar
Mechanical gate repair in Miramar covers hinges, posts, frames, rollers, and track systems. The typical call from 33023 involves a cast-iron or aluminum gate that’s dragging on the ground, a hinge that’s snapped at the weld, or a post that’s leaning after years of soil movement. With the area’s high water table and sandy subsoil, post anchor failure shows up more often here than in most Broward communities. We cut out the old anchor, reset the post, and restore alignment so the gate swings or slides without binding. See the full scope and local pricing on the Gate Repair in Miramar page.
Electric Gate Repair in Miramar
Electric gate repair in Miramar is its own specialty: control boards, motors, loop detectors, photo eyes, keypads, and remote receivers. The salt air that rusts hinges also corrodes wire connections and terminal blocks, which means intermittent failures are common here. A gate that opens fine in the morning and refuses to close at night usually has a corroded connection or a failing capacitor, not a dead motor. We diagnose the system end to end, and we work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. Full detail is on the Electric Gate Repair in Miramar page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Miramar
Gate installation in Miramar typically means either replacing a 1970s or 1980s gate that has rusted beyond repair, or putting in a new automatic system on a home that never had one. The humidity and salt air in 33023 shorten the life of untreated steel and poorly sealed aluminum, so we spec materials and finishes for this climate specifically. For the full installation overview, see our Gate Installation service page.
Automatic Gate Installation
Signs you need it
You have an existing manual gate you want to open from the car, or the old opener has failed and replacement parts are no longer made for it.
What it costs in Miramar
Automatic gate installation in Miramar typically runs $2,800 to $7,500 depending on gate length, opener type, and access control options.
How we do it
We measure the gate and posts, confirm the power access, mount the operator, install safety edges and photo eyes, then program remotes and keypads and test the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the hinges, sagging past adjustment, or sized wrong for the opening.
What it costs in Miramar
Driveway gate installation in Miramar typically falls between $1,800 and $5,500 for material and labor, before automation.
How we do it
We pull the old gate and post if needed, set new posts in concrete, hang the new gate, and adjust the hinges for clean clearance across the driveway.
Sliding Gate Installation
Signs you need it
Your driveway slope or layout makes a swing gate impractical, or you want a gate that doesn’t need open clearance space in front.
What it costs in Miramar
Sliding gate installation in Miramar typical range is $3,000 to $8,000 including track, rollers, and gate frame.
How we do it
We set the track and roller line, build the sliding frame, install the gate, and align it so it travels without drag or wobble.
What Gate Installation Costs in Miramar
| Item | Typical range in Miramar |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $4,000 |
| Automatic gate with opener and safety | $2,800 – $7,500 |
| Sliding gate with track system | $3,000 – $8,000 |
How long does gate installation take in Miramar?
Most residential gate installations in Miramar take one to two working days after permitting is cleared, which we handle as part of the scope. Weather and post-set curing time can stretch that by a day or two.
Do you handle the electrical run and permits for Miramar gate installation?
Yes. We handle the low-voltage and line-voltage runs to the operator, plus the required permitting for the gate and opener. The price is agreed before any work starts.
Brands We Service in Miramar
We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. That brand span matters in Miramar because 33023 homes carry a real mix: a 1980s FAAC on one street, a Mighty Mule retrofit on the next, an Elite commercial slide at a townhome entry. We stock the common boards, remote receivers, and limit-switch parts locally for faster turnarounds. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miramar, FL
| Service | Typical range in Miramar |
|---|---|
| Gate repair (hinge or post reset) | $250 – $900 |
| Weld repair | $150 – $450 |
| Automatic gate opener repair | $300 – $1,200 |
| Control board replacement | $400 – $1,500 |
| Loop detector repair or replacement | $350 – $1,000 |
| Manual driveway gate installation | $1,800 – $4,000 |
| Automatic gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,000 – $8,000 |
Miramar pricing runs toward the upper part of these ranges when a post has to be cut out and reset in fresh concrete, or when salt corrosion has spread into the operator wiring and control board terminals. Every quote is written and agreed before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Miramar
We cover the full 33023 ZIP code across Miramar, from the West Park border east through the older ranch-home streets and into the townhome communities. Response time for most gate repair calls in Miramar is same day when the call reaches us before early afternoon, with next-morning slots for the rest.
- West Park border area along the 33023 line
- Original 1970s – 80s ranch-home streets off Douglas Road
- Townhome communities with shared entry gates
- Single-family pockets around Miramar Boulevard
- Communities with rear carport access gates
Service Area – Cities Near Miramar
Our service area reaches Miramar and the surrounding South Broward communities. We handle gate work in West Park, FL, the unincorporated Carver Ranches, FL area just north of Miami Gardens, and Andover, FL to the northeast. We also cover Hollywood, FL for coastal properties facing heavier salt exposure. If you’re in any of these nearby cities and want a gate quote, call the same number: (855) 382-0732.
Serving Miramar, FL — Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miramar
For new installations and electrical work, we handle the permitting with the City of Miramar and manage the inspection process. Repairs to existing hardware generally do not require a permit, and we’ll tell you upfront which category your job falls into before we start.
Most Miramar repair calls are scheduled same day if we hear from you before early afternoon. Installation work is quoted and booked, not dispatched, so the timeline for a new gate depends on material lead time and permitting, usually within two weeks.
We cover the full Miramar area including all of 33023, with regular calls in the older ranch-home blocks along the West Park border and the townhome communities near Miramar Boulevard. If you’re in Miramar, you’re in our area. Call (855) 382-0732 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miramar Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Andres Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tara Sullivan"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Michelle Whitaker