Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Andover, FL
Gate installation in Andover means working with the housing stock and climate that define this corner of Broward County. Most homes here were built between the 1960s and 1980s, and their driveway and entry gates are either original aluminum units or mid-life replacements bolted to masonry walls and footings. The work we do here leans heavily toward sliding and rolling gates that have to keep working through hurricane season, salt air, and decades of accumulated wear. If you need a new gate or a full replacement in Andover, call us at (855) 382-0732 for a free estimate. We’ll measure, quote, and install without sending you to a second contractor.
Why Andover Homes Are Different
Andover sits in the Miramar and Pembroke Park corridor of South Florida, sharing the same ZIP code, 33023, and the same post-Andrew building rules that changed how every gate is anchored and braced. The homes here are predominantly 1960s through 1980s ranch houses on flat lots, plus low-rise gated townhome and condo communities whose entry gates were installed when the developments were first built. Those gates have now been in service for 30 to 50 years. We routinely see tracks worn past their service life, rusted hardware, and operators that predate modern safety standards.
The bigger issue is what those gates are anchored to. Many original concrete footings were poured to pre-1994 wind standards, which means a gate that still looks straight may not meet Broward County’s current high-velocity hurricane zone requirements. Repairs in Andover often turn into re-anchoring the track, upgrading the posts, or replacing the operator with a unit that can hold up to salt-laden wind-driven rain. This is not cosmetic work. A gate that fails in a storm becomes a projectile.
Styles & brands we work with
Our Main Andover Services
Most Andover homeowners first call us for one of two reasons: a gate that won’t open or close properly, or an electric system that stopped responding. Both are covered by our two core repair services.
Gate Repair in Andover
Mechanical gate repair covers everything from a sagging gate leaf to a track that has pulled loose from its anchors. In Andover, the most common calls involve aluminum sliding gates that have jumped their rollers, bent hinges on swing gates, and posts that have shifted in the sandy soil. We repair the structure first, then verify the gate travels true before touching any operators or electronics. Learn more on our Gate Repair in Andover page.
Electric Gate Repair in Andover
When a LiftMaster or FAAC operator stops responding, the problem is usually in the control board, a blown motor, or a loop detector that no longer senses vehicles. Our electric gate work in Andover includes diagnosing the full system, from the keypad or intercom at the curb to the actuator on the gate leaf. We carry parts for all the major brands and can usually identify the fault on the first visit. Full details are on our Electric Gate Repair in Andover page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Andover
Gate installation in Andover is rarely a simple bolt-in job. Between the 1960s-era homes with original masonry columns, the gated communities off Pembroke Road and the Miramar Parkway corridor, and Broward County’s high-velocity hurricane zone rules, most new gate projects start with the footing and work up from there. We replace gates that have outlived their tracks, install new automatic systems on existing columns, and build out complete driveway and entry gate setups. Our Gate Installation service covers the full scope, from the first measurement to the final safety check.
Automatic Gate Installation
Signs you need it
You want to open and close your gate without getting out of the car, or you have an old manual gate that you’d rather automate than keep wrestling with by hand.
What it costs in Andover
Automatic gate installation in Andover typically runs $2,800 to $7,400 for a complete system with operator, tracks, brackets, and access controls.
How we do it
We survey the driveway and existing posts, spec an operator matched to the gate weight and cycle count, pour or reinforce the mounting pad, then install, wire, and program the operator and any keypads or remotes.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through, dragging on the ground, or the track hardware is so worn that repairing it costs more than a new setup.
What it costs in Andover
A new driveway gate in Andover generally lands between $2,100 and $5,800, including the gate leaf, posts or track, and labor, but not always the operator.
How we do it
We measure the driveway opening, check for underground utilities, set new posts or a full track, hang the gate, then align travel and test the full range of motion before handing it over.
What Gate Installation Costs in Andover
| Item | Typical range in Andover |
|---|---|
| Driveway gate installation | $2,100 – $5,800 |
| Automatic gate installation | $2,800 – $7,400 |
| Sliding gate track replacement | $650 – $3,500 |
Figures above reflect typical residential jobs in Andover’s 33023 ZIP. Your exact price depends on gate length, column condition, and whether we’re reusing or replacing the operator.
How long does gate installation take in Andover?
Most residential driveway gate installations in Andover take one to two days on site. New footings may need a day of cure time before we hang the gate, and we schedule around that rather than rushing the pour.
Can you install a new gate on my existing concrete posts?
In many Andover homes, yes. We inspect the posts for cracks and verify the footing depth first. If the existing columns meet Broward wind-load standards, we can mount the new gate and hardware directly to them.
Brands We Service in Andover
We work on LiftMaster, FAAC, Elite, and Mighty Mule operators regularly across Andover, and we stock common boards, remotes, and safety edges locally. Because our technicians know these brands side by side, we can usually repair the operator you already own instead of pushing a full replacement. See our brands for the complete list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Andover, FL
All prices are quoted and agreed before any work starts. Here are the ranges we typically see in Andover.
| Service | Typical range in Andover |
|---|---|
| Gate Installation | $2,100 – $7,400 |
| Sliding Gate Installation | $900 – $3,600 |
| Gate Opener Installation | $900 – $2,850 |
| Control Board Repair | $300 – $650 |
| Keypad/Intercom Repair | $180 – $420 |
| Gate Operator Replacement | $850 – $2,100 |
| Track/V-Groove Repair | $250 – $800 |
| Weld/Break Repair | $200 – $700 |
| Hinge Replacement | $420 – $1,900 |
| Service Call/Diagnostic | $75 – $120 |
Prices in Andover run higher on gates that need re-anchoring to meet current wind codes, and on communities off Miramar Parkway where older footings require additional concrete work. Whatever the job, you’ll get a written price before we start and there’s no surprise line item at the end.
Neighborhoods We Serve in Andover
We cover all of Andover’s 33023 ZIP, from the older ranch streets to the gated townhome and condo communities along the Pembroke Road and Miramar Parkway corridors. Typical response time in Andover is within one business day for most repair calls, with faster scheduling for gates that won’t close at all.
- Andover Lakes
- Pembroke Road corridor communities
- Miramar Parkway corridor communities
- Gated townhome complexes off 33rd Avenue
- Single-family ranch streets throughout 33023
Service Area – Cities Near Andover
Our gate repair and installation service area extends north into West Park, FL and Carver Ranches, FL, east toward Hollywood, FL, and south into Miramar, FL. We regularly work in the gated communities and older residential neighborhoods throughout this part of Broward County.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Andover
We schedule most Andover repair calls within one business day. If your gate is stuck open or won’t close at all, call (855) 382-0732 and we’ll prioritize it, since an open gate means no security for the property behind it.
Many Andover communities have architectural review rules for gates, especially in gated townhome and condo communities. We can help with the technical details for your application, but the owner is responsible for the approval itself.
We diagnose the gate structure and the operator together, then give you the straight answer. If the frame and track have life left, we’ll replace only the operator or control board. If the gate won’t pass a wind-load check, we’ll tell you that a repair would be money wasted.
Call Miami Gardens Gate Repair at (855) 382-0732 for a free estimate on gate installation, repair, or electric gate work in Andover, FL.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Andover Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rafael Garcia"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Brooke Parker