Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Coral Terrace, FL | Miami Gardens Gate Repair
If your Ghost Controls opener quit responding, is beeping, or swings your gate halfway before reversing, we can fix it. We provide independent Ghost Controls repair service throughout Coral Terrace, and the thing that makes our work here different comes down to the gates themselves: most of the homes in this neighborhood were built between the 1950s and 1970s, which means we’re usually repairing an opener that’s mounted on an original welded steel gate, not a factory-fresh kit. The opener isn’t always the problem. Call (855) 382-0732 and we’ll diagnose the whole system, gate and all.
We’re Miami Gardens Gate Repair, and Ghost Controls is one of the nine gate operator brands we work on daily. We know Ghost Controls sales & service inside and out, from the TDS2 dual swing series to the AXS1 Architect kits with solar and battery power. But knowing the operator is only half the job in Coral Terrace. The other half is understanding what 50 years of salt air, summer downpours, and a sagging welded gate does to that operator.
Why Coral Terrace Residents Choose Us for Ghost Controls Service
We work on Ghost Controls systems every week, and that brand-specific repetition matters. Our technicians can look at a Ghost Controls TDS2 arm and tell you in minutes whether the control board is fried, the limit switch is corroded, or the gate itself is dragging on the concrete. Most general repair companies see Ghost Controls as one line item on a long list of brands. For us, it’s a system we’ve opened up, rewired, and rebuilt enough times to know its failure patterns before we even pull the cover off.
What’s it mean for you in Coral Terrace? Faster diagnosis, fewer return trips, and honest guidance on whether to repair or replace. Noel Carballo, our owner and lead technician, grew up in the Scott Lake neighborhood of Miami Gardens, where half the driveways had a gate that stuck, groaned, or refused to open. He studied electrical and mechanical systems at Miami Dade College’s North Campus, has handled Ghost Controls repair in West Miami, and he’s spent the better part of two decades diagnosing operators, rewiring access systems, and keeping gates running across Miami-Dade. When a Coral Terrace homeowner calls about a Ghost Controls opener that died after a storm, we don’t start from zero. We start from knowing exactly what that storm likely did to it.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Coral Terrace
- Dead operator after summer downpours. Coral Terrace gets hammered with afternoon thunderstorms from June through September. Water finds its way into Ghost Controls control boxes through worn gaskets or cracked seals, and the solar charge controller or battery fails first. The gate sits dead until someone releases it manually, and that’s the call we get.
- Corroded operator arms and limit switches. Salt-laden air off Biscayne Bay travels inland and settles on everything metal. Ghost Controls arms mounted low on welded steel gates seize at the pivot points. Limit switches corrode and send false stop signals. We’ve replaced enough of these to know exactly which components fail first in this climate.
- Safety sensor misalignment on pool enclosure gates. Coral Terrace has a high share of pool enclosures, and Florida pool-barrier code requires self-closing, self-latching gates. When a Ghost Controls safety sensor gets knocked out of alignment or takes on moisture, the operator reverses or refuses to close. That’s a code violation and a potential fine, not just an annoyance.
- Keypad and remote receiver board failures after lightning season. Ghost Controls boards are sensitive to voltage spikes, and older Coral Terrace wiring doesn’t always buffer surges well. A close lightning strike can take out the receiver board even if everything else on the property survives.
- Gate drag causing false safety reverses. On 1950s and 1960s ranch homes throughout Coral Terrace, the original welded steel swing gate has developed sag over decades. The Ghost Controls operator is working fine, but it senses the resistance of a gate dragging on the driveway and trips the safety reverse. Every afternoon, the gate opens, then turns around and reverses. People call it a Ghost Controls failure. It’s usually the gate.
Ghost Controls Service in Coral Terrace: What Local Conditions Mean for Your Equipment
Here’s what you won’t read on a generic Ghost Controls repair page: the single most common reason a Coral Terrace resident calls us for an opener failure is that the gate itself has outlived its own hardware. Coral Terrace is an unincorporated Miami-Dade community of mid-century single-family homes where nearly every property has a perimeter fence, driveway gate, or pool gate. Because it’s a residential enclave tucked between Coral Gables, South Miami, and Ghost Controls repair in Westchester rather than a deed-restricted HOA town, gate hardware runs the full spectrum from 1950s manual swing gates to hurricane-era automated sliders. That means repairs here are custom-fabrication and retrofit jobs, not warranty swaps.
What does that mean for Ghost Controls owners specifically? Most of the Ghost Controls operators we service in Coral Terrace were retrofitted onto original welded steel gates that were never designed to hold an electric opener. The gate’s own sag and hinge wear, not the opener, is the root cause of most “Ghost Controls failure” calls we run. We can replace the board and the arm and the transformer, but if the gate is dragging on the concrete or the hinge is pulling away from the post, that new equipment will fight the same battle. We fix the gate first, then the opener.
On a 1950s ranch off S.W. 64th Street, our crew found a Ghost Controls TDS2 dual-swing operator installed on an original welded steel gate with a sagging hinge. The control board was fine, but the gate drug on the ground and tripped the safety reverse every afternoon. We replaced the hinge and post bracket, realigned the gate, and reset the operator limits. The homeowner kept the same Ghost Controls system, and the gate has run clean through two hurricane seasons. That’s the difference between treating the symptom and fixing what actually broke.
Ghost Controls Models & Products We Service in Coral Terrace
We service the full Ghost Controls lineup, including the TDS2 tandem dual swing series, the AXS1 Architect single swing series, the Heavy-Duty Dual Swing TDS series, and the automatic gate opener kits with solar and battery configurations. If you’ve got a Ghost Controls gate opener, we’ve worked on that model family.
When it comes to parts, we use genuine Ghost Controls replacement boards, arms, and receivers when they’re available, and we’ll tell you when they’re not. For older installs, we use proven aftermarket solar and battery components that meet or exceed OEM specs. We keep a working stock of common Ghost Controls parts in our service vehicles, which means many Coral Terrace repairs happen in a single visit instead of waiting on a shipped part.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Coral Terrace
What you’ll pay depends on what’s actually wrong. A sensor realignment on a pool gate is a quick fix, often under $150. Replacing a solar charge controller and battery usually lands between $200 and $350. A full control board replacement for a Ghost Controls TDS2 can run $350 to $550 installed. If the gate itself needs hinge work, post reinforcement, or realignment, that’s additional, but we always quote the full scope before any work starts. No surprises on the invoice.
What does a free estimate include? We come to your Coral Terrace property, assess the gate and the operator together, and give you a written number for the repair. If repair isn’t the right call, we’ll tell you that too, and we’ll quote a replacement that fits the gate you have, not the one a catalog thinks you should have. Call (855) 382-0732 to schedule an estimate.
Serving Coral Terrace, FL — Our Local Coverage Area
We’re based in the Coral Terrace area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Coral Terrace
Why does my Ghost Controls gate opener keep beeping and reversing on my Coral Terrace pool gate?
The beeping and reversing is your operator’s safety system telling you something is blocking the gate or a sensor is misaligned. On Coral Terrace pool gates, moisture from afternoon storms gets into the photo eye or the sensor wiring, and the operator thinks an obstruction is there. We clean and seal the sensor housing, check the alignment, and verify the self-closing latch works properly. Call (855) 382-0732 and we’ll get it closing clean again.
Can you repair a Ghost Controls operator that stopped working after a summer storm?
Yes, and this is one of our most common Coral Terrace calls. Summer storms bring water intrusion and lightning surges. We test the control board, the solar charge controller, and the battery, then tell you exactly what failed and what it costs to fix. Most storm-damaged Ghost Controls systems are repairable without a full replacement. Call (855) 382-0732 for an estimate, and we’ll quote the work before we start.
My Ghost Controls remote only works up close. Is that a sign the receiver is bad?
Usually. Ghost Controls receiver boards are sensitive to voltage spikes, and lightning-season surges on older Coral Terrace wiring can degrade the receiver front end. We test the remote, the receiver, and the antenna connection to confirm where the signal is dying. Sometimes it’s a simple antenna relocation; sometimes it’s a receiver board we can replace without touching the rest of the opener.
Do you work on Ghost Controls gate openers installed on old welded steel gates that sag?
That’s exactly the kind of job we do most in Coral Terrace. The hardest part of repairing a Ghost Controls opener on a mid-century welded gate is accepting that the gate itself is part of the system. We replace hinges, reinforce posts, rebuild pivot points, and then reset the operator limits so the opener isn’t fighting the gate on every cycle. You keep your Ghost Controls system, and it works the way it should.
Is a Ghost Controls battery backup enough for hurricane-season power outages in Coral Terrace?
Not by itself, no. A battery backup runs the gate for a limited number of cycles, and if the charge controller has been compromised by water intrusion, the battery won’t hold. We test the battery’s capacity and the solar panel’s output, and we’ll tell you honestly whether your Ghost Controls setup will ride out a multi-day outage. Call (855) 382-0732 for an exact quote on a battery or charge controller replacement – estimates are free.
Service Areas Near Coral Terrace
We serve Coral Terrace and the surrounding Miami-Dade communities, so if you’re in Miami Gardens, Carol City, Scott Lake, Bunche Park, Lake Lucerne, or Miami Beach, we cover you too. Check out our Coral Terrace service area page for full details. We also provide Ghost Controls service in Roosevelt Gardens and Ghost Controls service in Weston for customers further out.
Book Your Ghost Controls Service in Coral Terrace Today
Your Ghost Controls opener is telling you something. If your gate’s giving you trouble, it’s telling you something. Let’s figure out what. Call (855) 382-0732 for a free estimate, and we’ll have a technician at your Coral Terrace property ready to diagnose the gate and the operator together. Same-day service is available for most Ghost Controls repair calls in the 33155 area and for Ghost Controls in Glenvar Heights.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Coral Terrace and Miami-Dade County.