Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Andover, FL | Miami Gardens Gate Repair
We repair Ghost Controls gate operators across Andover through our Andover Gate Repair service, and we do it with a level of brand familiarity that comes from working on these units all over South Florida. Independent service is what we provide. We’re not affiliated with Ghost Controls, but we know their AXS and TDS series cold, and we stock the parts to get your gate moving again. Andover’s hurricane-code requirements and coastal humidity add a layer that generic repair crews miss. Call (855) 382-0732 for a free estimate, and we’ll tell you exactly what’s wrong before any work starts.
Why Andover Residents Choose Us for Ghost Controls Service
When a Ghost Controls operator fails in Andover, the problem is rarely just one thing. Salt air corrodes limit switches. Brownouts stress battery backups. Aging concrete footings pull track anchors loose. We’ve seen all of it, and we diagnose the whole system, not just the symptom that triggered the service call. Noel Carballo grew up in Scott Lake, a few miles south, and spent his early years watching gates stick, groan, and refuse to open on nearly every driveway. He studied electrical and mechanical systems at Miami Dade College’s North Campus, which is where he learned to think through failures the way a technician should: what broke, why it broke, and what’s going to break next if we don’t address it now. That’s the approach we bring to every Andover job. See our Ghost Controls sales & service page for the full scope of what we handle with this brand.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Andover
- Limit switch corrosion: Andover’s salt-laden air works its way into the actuator housing and oxidizes limit switches. The gate stops mid-travel, reverses on contact, or beeps for no obvious reason.
- Battery backup drain and false low-voltage faults: AXS-series units beep and fail to cycle during outages when the backup battery has aged out. Older Andover communities see frequent brownouts, which accelerates the drain.
- Track and anchor fatigue on sliding gates: Ghost Controls slide operators paired with original aluminum tracks bind when concrete footings shift. This is a constant problem in pre-1994 gated communities off Pembroke Road.
- Control board moisture intrusion: Wind-driven summer rain pushes past aging seals on control boxes, shorts boards, and erases paired remotes. We see this all over Andover after heavy downpours.
- Remote and receiver failures after storms: Sometimes it’s the remote. Sometimes it’s the receiver. We test both on site instead of guessing, saving you the cost of a part you didn’t need.
Ghost Controls Service in Andover: What Local Conditions Mean for Your Equipment
Here’s something most repair crews won’t tell you, because they don’t work Andover week after week. In the older gated communities off Pembroke Road and along the Miramar Parkway corridor, Ghost Controls slide operators are frequently mounted to tracks whose original concrete footings were poured to pre-1994 wind standards. What starts as a simple motor repair often turns into something bigger; anchor bolts pulling loose from those old footings. That’s a hidden code liability. If we just swapped the motor and left the anchors untouched, your gate would bind again within months, and it would fail toward the side on the first strong wind. The salt air and year-round humidity compound it, eating through fasteners and hinge hardware that hasn’t been replaced since the community was built. If your gate’s giving you trouble, it’s telling you something. Let’s figure out what. One recent call in a 1980s gated townhome community off Pembroke Road involved a Ghost Controls TDS2 that stopped mid-travel and beeped three times. The limit switch was corroded. But we also found two anchor bolts pulled loose from the original footing. We replaced the switch, re-anchored the track to current Broward County high-velocity hurricane zone standards, and the gate has run clean through two heavy rain events since. That’s the difference between a parts-swap repair and an Andover-specific repair.
Ghost Controls Models & Products We Service in Andover
We work on Ghost Controls AXS Series operators (AXS1, AXS2), TDS Series tube gate openers (TDS2), and Heavy-Duty Slide Operators (HSD2). Battery backup systems, slide motors, and control boards are all in our wheelhouse. When OEM parts are available, we use genuine Ghost Controls replacement boards, motors, and battery harnesses, the same approach we apply during Ghost Controls repair in West Park. For wear items like rollers and limit switches, we’ll use high-quality aftermarket equivalents when Ghost Controls stock is backordered; the lead times on some of these parts can stretch weeks, and nobody in Andover wants a gate sitting open that long. If your unit is over 8 to 10 years old with two or more major component failures, we’ll lay out the repair-versus-replace math honestly. Sometimes the right move is a new operator, not another patch.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Andover
Most Ghost Controls repairs in Andover run between $185 and $480, depending on what failed. Limit switch replacement typically costs $185 to $325. Battery backup replacement lands between $165 and $290. Control board replacement runs $295 to $650. Slide motor repair is $320 to $680. Track re-anchoring, when that pre-1994 footing issue shows up, adds $250 to $600 depending on the extent of the concrete work. Every quote is agreed before we start. No work proceeds until you’ve approved the number. Call (855) 382-0732 for a free estimate, and we’ll walk through what your specific Ghost Controls unit needs.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Andover
The most common cause in Andover is corrosion on the limit switches inside the actuator housing. Salt-laden humidity works into the seals over time and oxidizes the contacts, which confuses the operator into thinking it’s hit its travel limit early. We see this constantly in communities near the coast, and the fix is replacement of the limit switch assembly. Call (855) 382-0732 and we’ll diagnose it on site.
Yes. This is a signature Andover problem. We re-anchor the track to current Broward County hurricane standards, which means drilling into fresh concrete and setting new anchor bolts at the correct spacing. The operator itself is usually still good; it’s the foundation work underneath that failed.
Could be either. Wind-driven rain can push moisture past the control box seal and short the receiver board, or it can just be a dead remote battery. We test both on site. If the receiver board is fried, we replace it and re-pair your existing remotes. If it’s just the remote, you save the cost of a board you never needed.
If your AXS unit beeps without opening during a power interruption, the battery is done. Most backup batteries in Andover last three to five years, but the frequent brownouts in older neighborhoods can shorten that. We test the battery under load, not just with a voltage meter, because a battery can hold voltage and still fail when it’s asked to actually move the gate.
We do. In fact, that’s most of what we see in Andover. The aluminum tracks and rollers from the original community build-outs have decades of wear, and the operators bolted to them need more than a parts swap. We evaluate the track, the anchors, and the operator together, because they fail together. Call (855) 382-0732 for a free estimate on your Ghost Controls system.
Service Areas Near Andover
We serve Andover and the surrounding South Florida communities, including Miami Gardens, Carol City, Scott Lake, Bunche Park, and Lake Lucerne. If you’re in one of these areas with a Ghost Controls gate problem, we can help. See our Andover service area page for details. Also check Ghost Controls service in Opa-locka and Ghost Controls service in Miramar if you’re a bit further out.
Book Your Ghost Controls Service in Andover Today
If your Ghost Controls gate is stuck, beeping, or grinding in Andover, call (855) 382-0732. We’ll schedule a time to diagnose the system and quote the repair before any work begins. Same-day appointments are available for urgent failures. Get your gate moving again without guessing at the problem.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Andover and South Florida with Ghost Controls repair and gate service, including Ghost Controls in Hollywood.