Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Campbell, FL | Miami Gardens Gate Repair
We repair Ghost Controls gate operators throughout Campbell, FL, and the surrounding 34746 ZIP, plus Ghost Controls repair in Buenaventura Lakes. When a Ghost Controls swing or slide gate dies here, it’s usually not the motor. It’s the battery, the board, or a hinge that Central Florida humidity has been working on for months. Our team shows up knowing which one it is, and we’re set up to work with property managers and cleaning crews when the owner is out of state.
We’re an independent service provider, not a manufacturer affiliate. That means we fix Ghost Controls equipment honestly. If the board is salvageable, we repair it. If the battery is sulfated and the arm is dragging on a seized hinge, we tell you that too. Call (855) 382-0732 and we’ll get your gate cycling again.
Why Campbell Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment every week, and that repetition is what separates us from a handyman who Googles the model number on your driveway. Noel Carballo, our lead technician, grew up in Scott Lake and studied electrical and mechanical systems at Miami Dade College’s North Campus. That training is what lets us trace a “dead” Ghost Controls operator back to a corroded terminal block or a battery harness that’s been baking in the Florida sun, instead of throwing parts at the problem.
Campbell gate owners pick us for three reasons. First, we know the Ghost Controls sales & service line at the board level: Stealth, ARES, Titan, and the AXS accessory line are all familiar territory. Second, we carry the parts that fail most often in this climate, so we’re not waiting on a shipment while your rental sits unsecured. Third, we understand that in Campbell, the gate owner usually isn’t standing in the driveway when we arrive. We schedule around property managers, coordinate access with cleaning crews, and get the repair verified before the next guest walks in.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Campbell
- Dead or slow operator after a long idle stretch. Vacation-rental gates off the US-192 and 429 corridor sit uncycled between guests. The solar panel bakes in full sun, the battery sulfates, and the arm goes dead or sluggish on backup power. We test the panel output, load-test the battery, and replace the harness when the terminals have corroded.
- “Worked all spring, dead after the first storm.” Central Florida’s summer thunderstorm season is brutal on Ghost Controls enclosures. Gaskets flatten, humidity wicks into control boards, and photo-eye and keypad connectors pit. In Campbell, that first heavy downpour after a dry stretch is often the event that finishes a board that was already failing.
- Operator arms dragging on seized or sagging hinges. The 1990s and 2000s stucco-block homes and villa communities in 34746 typically have aluminum or wrought-iron driveway gates on aging posts. Sandy soil shifts after heavy rain, the post leans, the hinge binds, and the operator arm trips its obstruction fault even though the electronics are fine. We free the hinge, square the gate, and reset the limits.
- Manual release and limit drift on high-cycle gates. HOA entries and rental driveway gates can cycle hundreds of times a season. Without periodic adjustment, the arm over-travels, the gate doesn’t fully latch at close, and the battery never recovers fully between short bursts of guest use. We reset limits, adjust the close direction force, and test the latch.
- Battery backup failure on AC Titan slide operators. Titan series slide operators in Campbell’s HOA communities run on AC power with battery backup. When summer outages hit, the backup battery is often the weak point, and the gate either won’t move or moves at half speed. We test the battery under load and replace it before it strands a gate open.
Ghost Controls Service in Campbell: What Local Conditions Mean for Your Equipment
Campbell sits in unincorporated Osceola County inside the 34746 vacation-rental belt, which means the gate owner is almost never on site. Access runs through property managers and cleaning crews, and the repair window is a guest turnover, not a homeowner’s afternoon. That changes everything about how we do Ghost Controls in Celebration-area vacation rentals too, but Campbell has its own rhythm. We schedule, test, and sign off repairs around check-out and check-in times. A gate that’s still cycling when the new guest arrives is the goal. A gate we can’t verify closed and latched is a callback neither the property manager nor the owner wants.
This pattern is distinct from owner-occupied neighborhoods in Kissimmee or Poinciana to the south. In Campbell, the gate has to be fixed before the cleaning crew finishes the turnover, and the owner has to approve the repair from another state. We handle that approval process, send photos, and leave the gate tested and latched. If your rental is on the 192 side of Campbell and the gate is dead, don’t wait until checkout day. Call us the moment it’s reported.
Ghost Controls Models & Products We Service in Campbell
We service the Stealth ST300 and ST400 solar swing operators, the ARES series solar swing and slide units, and the Titan AC-powered slide operators. We also work on the AXS accessory line: keypads, photo-eyes, remotes, and battery harnesses. On the parts side, we use genuine Ghost Controls boards, arms, batteries, and solar harnesses where the revision matters. For photo-eyes, keypads, hinges, and mounting brackets, we’ll use quality aftermarket parts when they hold up better in this humidity. If the gate leaf and posts are still sound, we repair the operator. If the frame is racked or the post has heaved, we’ll tell you straight that no new board will fix the gate until it’s squared.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Campbell
Ghost Controls repair pricing in Campbell depends on what failed and what needs to be replaced. Here’s a straight look at what to expect:
- Diagnostic service call: $85 – $125 for a skilled technician to arrive, test the operator, and identify the fault.
- Battery replacement (solar or AC backup): $120 – $260 depending on the battery type and whether the harness and terminals need attention.
- Control board repair or replacement: $190 – $450 depending on the board revision and whether we can salvage or reflash the existing unit.
- Hinge freeing, post adjustment, and limit reset: $110 – $280 depending on how far the gate has sagged and whether the post needs concrete work.
- Full operator replacement (parts and labor): $600 – $1,400 depending on the model line and whether you’re replacing like-for-like or upgrading.
Every price is quoted and agreed before any work starts. You’ll never see an invoice bigger than the quote, and the estimate itself is free. Call (855) 382-0732 and we’ll walk through what you’re seeing, what it likely costs, and whether it makes more sense to repair or replace.
Serving Campbell, FL — Our Local Coverage Area
We’re based in the Campbell area and know this community well, and we also handle Ghost Controls repair in Loughman. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Campbell
We coordinate access through the property manager or cleaning crew, same as we do for dozens of rentals in the 34746 belt. We schedule the repair for a turnover window, test the gate through several full cycles, and send photos and a written summary to the owner before we leave. If you’re a property manager in Campbell, call (855) 382-0732 and we’ll get the gate repaired before your next check-in.
Because Central Florida storm humidity corrodes the board terminals and battery harness inside the operator enclosure, and the surge from nearby lightning can finish a board that was already marginal. The enclosure gaskets flatten over time, moisture wicks in, and the connectors pit. We clean, reseal, and replace the corroded sections so the next storm doesn’t put the gate down again. That’s the fix in Campbell, where storm season runs from June through September.
Not if it’s maintained. The problem in Campbell is that solar panels on Ghost Controls units get coated with pollen, dust, and tree debris, and the battery sulfates during long stretches between guests. The operator itself is fine; the power system just needs servicing. We clean the panel, load-test the battery, and replace the harness when the terminals have corroded. No, the operator isn’t the problem. Yes, the maintenance gap is.
Usually not. In our experience with Campbell HOA entries, a gate that won’t latch at close is almost always a limit or close-force adjustment issue, often compounded by a hinge that’s gotten stiffer as the post shifts in sandy soil. The board thinks the gate hit an obstruction and reverses. We reset the limits, adjust the close-direction force, and free the hinge. If the board is actually faulty, we’ll tell you. But we won’t sell you a board if the hinge is the problem.
We use genuine Ghost Controls boards, arms, batteries, and solar harnesses where the revision matters. For photo-eyes, keypads, hinges, and mounting brackets, we’ll use a quality aftermarket part when it holds up better in this humidity. We’ll always tell you which one we’re using and why. Call (855) 382-0732 for a straight answer on your specific operator.
Service Areas Near Campbell
We cover Campbell and the surrounding 34746 area, extending to the vacation-rental and HOA communities across the 192 and 429 corridors. We also serve Campbell service area neighbors, including Ghost Controls service in Fussels Corner and Ghost Controls service in Balm. If your gate is on the southern edge of our Campbell coverage and you’re not sure we’ll come out, call us. Odds are we already have a technician in the area.
Book Your Ghost Controls Service in Campbell Today
If your Ghost Controls gate is down in Campbell, call (855) 382-0732 now. We’ll talk through what’s happening, schedule the repair around your turnover or HOA schedule, and get the gate tested and latched before we leave. If your gate’s giving you trouble, it’s telling you something. Let’s figure out what.
Written by Noel Carballo, Owner and Lead Gate Technician at Miami Gardens Gate Repair, serving Campbell and the 34746 belt.