Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Andover
Electric gate repair in Andover usually means one of two things: a motor that quit, or a gate that won’t move the way it should. Either way, we fix it. We work throughout the 33023 ZIP and the Miramar/Pembroke Park corridor, so we know what these gates are up against: salt air, hurricane season, and decades of wear on hardware that was installed long before current code existed. If your gate is stuck, grinding, or refusing to close, call (855) 382-0732 and we’ll get a technician out to diagnose it. Most Andover calls get same-day or next-day service, and we quote the price before any work starts.
Why Miami Gardens Gate Repair Is Andover’s Preferred Electric Gate Repair Company
We’re a gate-only shop. That’s the whole story. Our techs don’t split their week between pool pumps and garage doors; they work on operators, control boards, tracks, hinges, and access systems every single day. For an Andover homeowner, that means the person at your gate has already seen your exact failure mode this week, probably twice.
Noel Carballo leads our team, and he’s built the company around one idea: know the brands, know the codes, and tell the customer the truth about what’s worth fixing. We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That brand knowledge matters here, because Andover has a lot of legacy equipment. We don’t need to look up how a 1990s Linear board behaves. We’ve replaced enough of them to know.
Andover customers call us because the gate is a security feature, not a decoration. When it won’t close, the whole property is exposed. We treat every call that way and we get to Andover fast. Our service area runs straight down the Miramar Parkway corridor, so we’re never far from Carver Ranches, West Park, or the neighborhoods around Pembroke Road.
Styles & brands we work with
Electric Gate Motor in Andover
Electric gate motor repair in Andover usually starts with the motor, but it rarely ends there. Here’s what we mean: a motor that overheats and trips its thermal overload is often straining against something, and in Andover that something is usually a rusted hinge post, a track that’s shifted off its footing, or a rack and pinion that’s binding. We diagnose the whole system, not just the symptom. Expect to pay $180 – $340 for a typical motor diagnostic and repair in Andover, with a full motor replacement running $650 – $1,400 depending on the brand and horsepower.
Motor Diagnosis and Replacement
A LiftMaster that hums but won’t move typically has a failed capacitor, and that’s a $40 part plus labor. A FAAC hydraulic motor with a blown seal is a different job entirely. Before we price anything, we test amperage draw, inspect the capacitor and gearbox, and check the limit switches. You get a written quote before we turn a wrench.
Control Board Failures
Andover’s older gates, the ones installed in the 1980s and 1990s, often run on control boards that are no longer made. Pre-UL325 boards are especially prone to failure during voltage spikes, which South Florida’s storm season delivers on a regular basis. If your operator still works mechanically but the logic is failing, we’ll tell you honestly whether a retrofit board is available or whether the smarter move is a new operator altogether.
Gate Access Control in Andover
Gate access control in Andover covers everything that tells the gate when to open: keypads, remotes, loop detectors, intercoms, and the safety photocells. If your keypad works intermittently or your gate ignores the remote, the fault could be in the access device itself or in the operator’s receiver board. The only way to know is to test each component in sequence. In Andover, keypad repair or replacement typically runs $150 – $450, loop detector replacement $250 – $600, and full access system integration $900 – $2,800 depending on how many entry points and credentials are involved.
Keypad, Remote, and Intercom Repair
Salt air is hard on keypad membranes and remote batteries. We see corroded keypad contacts all the time in Andover, especially on pedestal-mounted units near the road. If the keypad is dead, we test the wiring back to the board before we sell you a new keypad. If the intercom buzzes but won’t release the gate, it’s usually a relay on the control board, not the intercom unit itself.
Safety Photocells and Loop Detectors
Photocells are the most common cause of a gate that reverses immediately or refuses to close. In Andover, we also see false loop detector trips after heavy rain, because water infiltration in the saw-cut loop can change its inductance. We check alignment, clean the lenses, and test the loop’s frequency before we call it fixed.
Trusted Brands We Service in Andover
We repair operators from nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a marketing list, it’s a parts inventory. For Andover customers, it means we can often repair your existing operator the same day instead of telling you to wait a week for a part or replace the whole unit because we don’t know the brand. From a pre-UL325 LiftMaster to a newer Ghost Controls solar unit, we’ve worked on it. Our Electric Gate Repair team keeps common boards, capacitors, remotes, and safety edges on the trucks so Andover jobs move faster.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Andover Homes
- Pre-1994 footings that have shifted. Many Andover gates sit on concrete poured before Broward County adopted high-velocity hurricane zone standards. When the footing shifts, the track shifts, and the gate starts binding, tripping breakers, or throwing photocell faults.
- Obsolete control boards on legacy operators. Original LiftMaster and Linear boards from the 1980s and 1990s are common in Andover’s older gated communities. Replacement parts are often discontinued, which means retrofitting or upgrading the operator.
- Rusted hinge posts and fasteners from salt air. South Florida humidity and salt-laden wind eat hardware fast. A rusted hinge post can sag enough to throw the gate off square, and that arm strain on a swing gate leads to motor failure over time.
- Rack and pinion binding on slide gates. When a slide gate’s footing settles unevenly, the rack and pinion stop meshing cleanly. The gate jerks, stalls, or reverses mid-travel. Fixing it means resetting the track, not just adjusting the opener’s force settings.
Pricing for Electric Gate Repair in Andover, FL
Here’s what Andover homeowners should expect to pay. A basic service call and diagnostic runs $85 – $130. Capacitor replacement: $90 – $180. Hinge and hardware repair: $150 – $400. Photocell alignment or replacement: $120 – $300. Track re-anchoring to hurricane code: $500 – $1,500 depending on footing size and access. Full operator replacement: $1,100 – $3,400 installed. Every job gets a written quote agreed to before the work begins. No surprises on the invoice. Call (855) 382-0732 for a free estimate. If the fix is a $40 capacitor, we’ll tell you. If it’s a new board, we’ll show you why.
We Also Serve Cities Near Andover
Our gate repair coverage extends throughout the Miramar/Pembroke Park corridor. We regularly run calls to Electric Gate Repair in Andover neighbors in Carver Ranches, Miramar, West Park, and Hollywood. Same teams, same trucks, same brand coverage. If you’re just across the municipal line, call us. Easier to list the cities than to explain why a gate doesn’t care about city limits.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Andover
You can often replace just the motor, but you should check the rest of the system first. If the control board is original and discontinued, a new motor won’t solve a dead logic board, and many older boards can’t be safely retrofitted onto modern safety features. We’ll test the board, the limits, and the mechanical condition of the gate itself, then give you a straight answer on whether a motor swap or a full operator replacement is the better use of your money. Call (855) 382-0732 and we’ll price both options.
You usually can’t tell by looking. A footing poured before 1994 was built to older wind standards, and the only way to know if it still meets current high-velocity hurricane zone requirements is to expose the base and measure the depth and reinforcement. In Andover’s older communities off Pembroke Road and Miramar Parkway, we routinely find footings that are 18 – 24 inches deep when current code for these gates requires more. We’ll tell you exactly what we find and what re-anchoring costs before you commit to anything.
That usually means the safety system is detecting resistance or the travel limits are misreading the gate’s position. In Andover, the most common cause is a shifted track from a settling footing, which makes the motor work harder than the force settings allow. Rusted rack and pinion sections do the same thing. We check the footing, the track alignment, the gear mesh, and the photocells in one visit. It’s almost never just one component.
Yes, in most cases. Photocells and non-contact safety edges can be retrofitted onto legacy operators, provided the control board has inputs for them or can be swapped for a compatible modern board. We do this regularly for Andover gates that predate UL325 safety standards. The retrofit usually runs $400 – $1,500 depending on the board, the number of safety edges, and whether the gate’s mechanical condition needs attention at the same time.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you own one of those, we know it. If you own something else, bring it up and we’ll tell you honestly whether we can source parts for it. Most operators in Andover are one of those nine, and we carry common parts for all of them on our trucks.
Need your Andover gate running again? Call (855) 382-0732. Estimates are free, and we’ll give you a written price before any work begins.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Andover and the surrounding Miramar/Pembroke Park corridor with gate-only repair and installation services.