Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Coral Terrace, FL
Gate installation in Coral Terrace usually means fitting a new automated system to a mid-century property that was never built for one. Homes here run heavily to 1950s and 1960s ranch-style block construction with concrete-block walls and original steel or aluminum gates that have been adapted, patched, and retrofitted over decades. Salt-laden air off Biscayne Bay, year-round humidity, and hurricane-season wind loads all shape what we specify and how we build. If you need a new gate or a full replacement of one that’s reached the end of its life, call us at (855) 382-0732 for a free measure and a written price before any work starts.
Why Coral Terrace Homes Are Different
Coral Terrace is an unincorporated Miami-Dade community of mid-century single-family homes where nearly every property has a perimeter fence, driveway gate, or pool gate. Because it’s a residential enclave tucked between Coral Gables, South Miami, and Westchester rather than a deed-restricted HOA town, gate hardware runs the full spectrum from 1950s manual swing gates to hurricane-era automated sliders. That means most repair and installation work here is custom-fabrication and retrofit, not warranty swaps.
The 33155 zip covers mostly 1950s-to-1970s ranch-style block homes on small lots with concrete-block walls, chain-link or masonry perimeter fences, and a high share of pool enclosures. Gates are typically welded steel or aluminum swing and sliding units, often original and adapted over decades. Subtropical heat, daily humidity, and salt-laden air accelerate rust on steel gates, hinges, and operators. Summer downpours expose operator and sensor water intrusion. And hurricane-season wind-load requirements drive heavy-duty hardware and reinforced posts. Pool safety is a local code fact of life here too: Florida pool-barrier rules mean many Coral Terrace gate calls involve a sagging or self-closing hinge that fails the latch, which is a safety violation, not just an inconvenience.
Styles & brands we work with
Our Main Coral Terrace Services
Most Coral Terrace homeowners call us for one of two things: a gate that won’t open or close properly, or the electric system behind it that’s stopped responding. Here’s what each involves in this part of Miami-Dade.
Gate Repair in Coral Terrace
Repair work in Coral Terrace tends to be structural: rusted hinge pins, sagging steel frames, worn wheels on sliding gates, latch hardware that no longer meets pool-barrier code. The age of the housing stock means we’re often fixing gates that were installed decades before automation was added. Salt corrosion from Biscayne Bay breezes accelerates wear on steel components that might last years longer inland. We fabricate replacements on site when off-the-shelf parts don’t match the original. Read the full breakdown on our Gate Repair in Coral Terrace page.
Electric Gate Repair in Coral Terrace
Electric gate failures here usually trace to water intrusion in the control board, a failed actuator, or a loop detector that’s drifted out of calibration after heavy rain. We diagnose the system, not just the symptoms: checking the board, the motor, the safety edges, and the power run before recommending a repair or a replacement. Brand familiarity matters because a LiftMaster board fault and a FAAC actuator stall look different on the bench. See what’s covered on our Electric Gate Repair in Coral Terrace page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Coral Terrace
New gate installation in Coral Terrace usually means replacing a 40-to-60-year-old manual gate with an automated system, or swapping a rusted slider for a new one on reinforced posts. The job has to account for subtropical conditions: salt-laden air off Biscayne Bay, hurricane wind loads, and concrete-block construction that demands proper anchoring. We measure, specify hardware rated for the exposure, and install so the gate survives the first summer storm season without failing. From a bent hinge to a failed control board, gates are all we do, and full installation work is part of it. Learn more on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re still opening your driveway or perimeter gate by hand, or the existing operator is dead and the gate frame is too far gone to merit another repair.
What it costs in Coral Terrace
Automatic gate installation in Coral Terrace typically runs $3,150 to $9,600 for a single swing arm, $4,750 to $12,400 for a dual swing, and $4,900 to $12,800 for a sliding gate, including operator and basic electrical.
How we do it
We survey the site, set reinforced posts or columns to wind-load spec, mount the operator and arms, run power and safety edges, then program travel limits and remotes.
Sliding Gate Installation
Signs you need it
Your lot is narrow or the driveway slopes, so a swing gate can’t clear the opening, or your existing sliding gate has corroded beyond repair and the track is still viable.
What it costs in Coral Terrace
Sliding gate installation in Coral Terrace runs $4,900 to $12,800 for a standard cantilever or track slider, including the motor and controls.
How we do it
We set the track or cantilever rollers, hang the gate panel, mount the operator and rack, wire the control board, and tune travel speeds and safety stops.
What Gate Installation Costs in Coral Terrace
| Item | Typical range in Coral Terrace |
|---|---|
| Single swing automatic gate and operator | $3,150 – $9,600 |
| Dual swing automatic gate and operator | $4,750 – $12,400 |
| Sliding gate and operator | $4,900 – $12,800 |
Prices are site-specific. Concrete cutting, demo of an old gate, longer power runs, or column reconstruction on older block walls will push a Coral Terrace job toward the higher end. We quote a fixed price before any work begins, and that’s the price you pay.
How long does a new gate installation take in Coral Terrace?
Most residential automatic gate installations are done in one to two days. Custom sliding gates or jobs requiring new columns, concrete work, or longer electrical runs may stretch to three days. Weather delays from summer thunderstorms also affect scheduling.
Do I need a permit for a gate installation in Coral Terrace?
Because Coral Terrace is unincorporated Miami-Dade County, permit requirements follow county building code. Automatic gate operators, electrical runs, and new footings typically require a permit and inspection. We confirm scope and code compliance before we start the job.
Brands We Service in Coral Terrace
We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, and the rest of the major operator lines, so we know your gate brand because we work on all of them. We keep common control boards, actuators, and safety components on hand for Coral Terrace jobs, which shortens turnaround for brands like LiftMaster and FAAC. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Coral Terrace, FL
| Service | Typical range in Coral Terrace |
|---|---|
| Automatic gate installation (single swing) | $3,150 – $9,600 |
| Automatic gate installation (dual swing) | $4,750 – $12,400 |
| Sliding gate installation | $4,900 – $12,800 |
| Gate operator replacement (standard) | $450 – $1,100 |
| Gate operator replacement (heavy-duty/commercial) | $800 – $1,600 |
| Control board repair or replacement | $180 – $500 |
| Limit switch repair or replacement | $120 – $300 |
| Loop detector replacement | $175 – $450 |
| Post repair or reinforcement | $250 – $900 |
| Hinge repair or replacement | $150 – $600 |
| Gate opener electrical repair (diagnostic) | $85 – $225 |
Salt corrosion and wind exposure push Coral Terrace prices toward the higher end of these ranges: rusted posts need more fabrication time, and hurricane-rated reinforcement costs more than inland-standard hardware. Every quote is agreed in writing before work begins, so there are no surprises on the invoice.
Neighborhoods We Serve in Coral Terrace
We cover all of Coral Terrace and the surrounding 33155 area, including the residential streets between Coral Way and Bird Road and the blocks east of Westchester and west of Coral Gables.
- Coral Terrace proper
- West Miami border streets
- Area near Coral Park
- Blocks along SW 16th Street
- Area north of Bird Road
We can typically reach Coral Terrace gate calls within one business day for scheduled repairs, with emergency response available for gates stuck open or closed.
Service Area – Cities Near Coral Terrace
Miami Gardens Gate Repair serves Coral Terrace and the neighboring Miami-Dade communities around it. We work in Flagami, FL, West Miami, FL, Westchester, FL, and Glenvar Heights, FL as well. If you’re just outside Coral Terrace, call us anyway, we’ll tell you straight whether we can get a tech to you.
Serving Coral Terrace, FL — Our Local Coverage Area
We’re based in the Coral Terrace area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Coral Terrace
We schedule most Coral Terrace repairs within one business day. For a gate stuck open or closed that leaves a property unsecured, we prioritize emergency response. Call (855) 382-0732 and tell us what the gate is doing, and we’ll give you a straight answer on timing.
Coral Terrace is unincorporated Miami-Dade, so county building code applies. Most automatic gate installations and electrical work require a permit and inspection. We handle the permit paperwork and schedule inspections as part of the job, so you don’t have to chase the county.
Yes. Brand-agnostic troubleshooting is how we work. Whether the gate is a 1950s manual swing adapted to an add-on operator or a recent LiftMaster or FAAC install, we diagnose what’s there and repair it. We don’t push a brand switch or a full replacement unless the existing hardware genuinely can’t be saved.
If you need gate work in Coral Terrace, call Miami Gardens Gate Repair at (855) 382-0732 for a free estimate. We’ll measure, diagnose, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Terrace Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Brooke Parker"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Tariq Saleh