Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Twin Lakes, FL
Gate installation in Twin Lakes runs about $1,850 to $9,800 for a complete residential setup, with most mid-century-lot jobs landing between $2,400 and $5,600 depending on operator type, gate material, and whether we’re replacing worn posts along the way. This part of 33309 is a small, dense pocket of unincorporated Broward County where gates sit a few feet from the street, so swing clearances, right-of-way setbacks, and salt-air corrosion shape almost every quote we write. If you’ve got a gate that’s sagging, stuck, or missing entirely, call (855) 382-0732 and we’ll give you a straight number before any work starts.
Why Twin Lakes Homes Are Different
Twin Lakes is built tight. The housing stock here runs heavily to 1950s through 1970s concrete-block and stucco single-family homes and duplexes on small lots with short driveways. Gates are typically mounted to block or stucco walls, or to metal posts driven years ago, and those older posts are often the weak link when a gate gets replaced. We regularly find posts that have loosened inside the wall or rusted at the base, and putting a new gate on a failing post just means another service call in eighteen months. So we check the post before we quote the gate, and we’ll tell you honestly if the post needs re-setting or reinforcement first.
Then there’s the climate. South Florida’s salt-laden ocean air, year-round humidity, and the summer rainy season all work against steel gates and hardware here. Hinges corrode faster in Twin Lakes than they do ten miles inland. Powder coating eventually fails. Hurricane-season wind loads mean a gate that isn’t properly anchored becomes a liability, not a convenience, when a storm pushes through. That’s why we lean on impact-rated designs and heavier-duty hardware for most Twin Lakes installs, even on smaller residential gates where lighter equipment might have been fine in a drier market. This is a small-gate, high-corrosion area, and the work here reflects that.
Styles & brands we work with
Our Main Twin Lakes Services
Most Twin Lakes homeowners call us for one of two reasons: a gate that won’t open or close the way it should, or a gate that never existed and needs to be designed for a tight mid-century lot. Here’s what each one looks like around here.
Gate Repair in Twin Lakes
Repair calls in Twin Lakes usually come down to worn hinges, bent brackets, rusted posts, or a gate that’s started dragging on the driveway because the original install didn’t account for how much these small lots settle over time. We repair the mechanical side properly: re-welding or replacing hardware, re-setting posts into block walls, and realigning swing and slide gates so they move cleanly. The salt air here means we see more rust-through on hinges and latch hardware than most areas of Broward County, so we stock corrosion-resistant replacements rather than whatever’s cheapest on the shelf. Read more on our Gate Repair in Twin Lakes page.
Electric Gate Repair in Twin Lakes
Electric gate problems in Twin Lakes run from dead remote controls to control boards that have given up after a lightning strike or a wet season’s worth of humidity inside the operator housing. We diagnose the system, not just the symptom, and we work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Most Twin Lakes electric repairs are same-day or next-day because we carry common boards, remotes, and safety-edge parts locally. Read more on our Electric Gate Repair in Twin Lakes page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Twin Lakes
Gate installation in Twin Lakes means working with what these lots actually look like: short driveways, gates a few feet from the street, block or stucco walls on both sides, and neighbors close enough that swing clearance isn’t a nice-to-have, it’s the whole job. Most of what we install here are single residential swing gates and slide gates on fenced yards, built for privacy and hurricane resistance rather than estate-style curb appeal. Every Twin Lakes installation starts with a free site measure so we can check the post depth, swing radius, right-of-way setback, and what the existing wall or post can actually hold. For a deeper look at the full installation process, see our Gate Installation service page.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open a gate by hand, or you’ve got a swing gate that you’d rather not leave unsecured every time you’re in a hurry.
What it costs in Twin Lakes
Automatic gate installation in Twin Lakes typically runs $14,000 to $32,000 for a complete system, though smaller single-swing residential operators often come in lower.
How we do it
We mount the operator to a properly anchored post or pad, run the power connection, set the open and close limits, and wire in safety edges and a keypad or remote system before testing full travel cycles.
Sliding Gate Installation
Signs you need it
Your driveway is short and the gate can’t swing inward or outward without hitting the street, a parked car, or the neighbor’s wall.
What it costs in Twin Lakes
Sliding gate installation in Twin Lakes typically runs $1,850 to $9,600, depending on whether it’s a chain-driven residential slide or a heavier cantilever system.
How we do it
We set the track or cantilever posts in concrete, hang the gate so it rolls level, install the operator and rack, and adjust the limit switches and safety sensors so the gate stops cleanly every cycle.
What Gate Installation Costs in Twin Lakes
| Item | Typical range in Twin Lakes |
|---|---|
| Single swing gate, manual (no operator) | $1,850 – $5,200 |
| Single swing gate with automatic operator | $3,800 – $9,800 |
| Sliding gate, track or cantilever | $1,850 – $9,600 |
Do I need a permit to install a gate in Twin Lakes?
Twin Lakes is unincorporated Broward County, so gate installations are subject to county setback and permitting rules rather than a city government’s. We check right-of-way and setback requirements during the free measure and handle the permit paperwork for you.
How long does a gate installation take in Twin Lakes?
Most single residential gate installations in Twin Lakes take one to two days on site once the gate and operator arrive. Custom gate fabrication runs an additional two to four weeks, and we confirm the timeline before any deposit is taken.
Brands We Service in Twin Lakes
We’re factory-familiar with LiftMaster, FAAC, Elite, and Mighty Mule operators, among others, and we keep common boards, remotes, and safety parts stocked for the brands Twin Lakes homeowners actually have. When you call about a dead Mighty Mule or a FAAC that’s reversed its limits, we don’t need to research the operator before we can fix it. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Twin Lakes, FL
| Service | Typical range in Twin Lakes |
|---|---|
| Gate repair, general (hinges, alignment, welding) | $225 – $1,050 |
| Gate opener motor replacement | $650 – $1,600 |
| Electric gate control board replacement | $400 – $1,400 |
| Electric gate safety sensor/edge replacement | $150 – $400 |
| Automatic gate installation (full system) | $3,800 – $9,800 |
| Sliding gate installation | $1,850 – $9,600 |
| Manual swing gate installation | $1,850 – $5,200 |
| Electric gate repair, general diagnostics and fix | $150 – $970 |
What pushes a Twin Lakes price up is usually the post, not the gate. Older block walls need reinforcement, rusted posts need re-setting, and tight lots mean extra hardware for swing clearances and right-of-way compliance. Whatever the number is, you’ll get it in writing before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Twin Lakes
We work throughout the Twin Lakes pocket of 33309, from the streets off NW 9th Avenue down to the Oakland Park line. Most of the area is within a short drive of our shop, so repair calls are usually same-day or next-morning, and installation measures can often be scheduled within the week.
- Twin Lakes residential streets
- NW 31st Avenue corridor
- Area near Twin Lakes Park
- South of Commercial Boulevard
- East of I-95, 33309
Service Area – Cities Near Twin Lakes
Miami Gardens Gate Repair handles gate work across Broward County. Along with Twin Lakes, we regularly serve North Andrews Gardens, FL, Oakland Park, FL, Boulevard Gardens, FL, and Rock Island, FL. If you’re just outside 33309, call and we’ll confirm the scheduling window for your area.
Serving Twin Lakes, FL — Our Local Coverage Area
We’re based in the Twin Lakes area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Twin Lakes
Most Twin Lakes repair calls are same-day or next-morning, because we’re based nearby and stock the common parts for this area’s gate brands. Electric gate diagnostics on LiftMaster, FAAC, and Mighty Mule operators usually happen within 24 hours of your call.
Yes, and it’s not just about the storm itself. A gate that’s properly anchored with impact-rated hinges and heavy posts will also handle the everyday stress of salt air and humidity far better than light-duty hardware. We use corrosion-resistant materials on every Twin Lakes install.
Call (855) 382-0732 and tell us what you’re seeing. We’ll ask a few questions about your gate and its operator, then get you on the schedule for a measure or a service visit at a time that works. Estimates are free, and the price is always agreed before work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Twin Lakes Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Brooke Parker"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Tariq Saleh"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Gilbert Flores