Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sewall’s Point, FL | Miami Gardens Gate Repair
We provide independent Ghost Controls gate repair throughout Sewall’s Point, and the work here is different from anywhere else because of one thing: this peninsula town sits with the Indian River and St. Lucie Inlet on three sides of it. Ghost Controls operators on river-facing gates corrode, seize, and fall out of alignment years faster than identical units on street-side gates, and most of what we fix in Sewall’s Point isn’t a dead motor, it’s the salt and the shifting posts that come with living on the water. We’re Miami Gardens Gate Repair, and our technicians work on Stealth and ARES operators every week, so when you call (855) 382-0732, the person on the other end already knows your gate’s failure pattern before pulling into your driveway.
Why Sewall’s Point Residents Choose Us for Ghost Controls Service
Most gate companies will send a tech who pores over a Ghost Controls unit like it’s the first one they’ve ever seen. That’s not us. We work across nine major gate brands, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and that breadth matters because we know exactly how a Stealth behaves compared to a Mighty Mule or a FAAC when it’s been breathing salt air for years. Noel Carballo, our owner and lead technician, grew up around gates that stuck and groaned and refused to cooperate, and he’s spent the better part of two decades pulling control boards, rewiring access systems, and keeping coastal operators running. The specialization shows: we don’t do HVAC, we don’t do plumbing, and we don’t moonlight in garage doors. Gates are the whole job. That’s why Ghost Controls sales & service is a core part of what we do, not an add-on.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Sewall’s Point
These are the failures we see most often on Ghost Controls equipment in Sewall’s Point, and they rarely show up alone:
- Seized hinge pins and corroded actuator arms. Salt spray off the Indian River pits the arm and freezes the hinge barrel long before the motor itself misbehaves. A gate that groans and labors against its hinges is tearing up the operator even if the operator is still technically running.
- Control-box and terminal corrosion on Stealth and ARES housings. Most Ghost Controls boxes are mounted low on masonry or iron piers, and onshore breezes drive salt mist directly into the enclosure and onto the battery leads. We see green terminals and white crust inside boxes that still work, for now.
- Post-storm operator misalignment. After a named storm racks a gate leaf out of square, the operator trips limits or reverses because the geometry changed, not because the board failed. The gate is no longer plumb, and the operator knows it.
- Phantom obstruction faults. A swing gate that stops mid-travel and reverses is often reading a blockage that isn’t there. The photo-eye brackets and connectors have oxidized, so the operator sees a corroded sensor circuit as an obstruction. We fix the circuit, not the board.
- Two gates, two completely different conditions. On Sewall’s Point estates with a river-side gate and a street-side gate, the river-side unit will need hinge and fastener work twice as often. Treating both gates on the same schedule just wastes money on the street side and leaves the river side vulnerable.
Ghost Controls Service in Sewall’s Point: What Local Conditions Mean for Your Equipment
Sewall’s Point is a three-sided peninsula, which sounds obvious until you apply it to gate hardware. Gates facing the Indian River and St. Lucie Inlet side corrode and seize noticeably faster than street-side gates on the same property, because the prevailing salt spray never reaches the street side with the same intensity. We see this all along South Sewall’s Point Road and the river-facing estates: two gates on one property, same Ghost Controls model, installed the same year, and the river-side gate needs hinge pins and stainless fasteners while the street-side gate just needs a limit adjustment. That’s why our Gate Repair in Sewall’s Point always starts with a directional inspection. That’s not a deficiency in the hardware. It’s geography. If you live in Sewall’s Point and own a Ghost Controls gate, the first place to check is which direction it faces, because that determines your service interval and your parts spec more than anything else. We spec marine-grade connectors and stainless hardware on the river side as standard, because putting zinc-plated fasteners back in is just scheduling our next visit before we’ve left the driveway.
Ghost Controls Models & Products We Service in Sewall’s Point
We work on the full Ghost Controls lineup for residential swing gates. That’s the Stealth series, covering ST300 and ST400 class operators, the ARES series including ARES XL and ARES II, tube-gate and dual-gate swing kits with solar and battery-backup accessories, and the AXS accessory line: keypads, photo-eye sets, wireless remotes, and receivers. We keep genuine Ghost Controls boards, arms, and control housings in stock for common failures, and where the OEM part is the corrosion weak point, we use quality aftermarket hinges, stainless fasteners, and marine-grade connectors. If your Stealth or ARES unit is mechanically sound and only the arm, hinges, or accessories have failed, we repair it. Replacement only gets recommended when the housing or battery compartment has corroded through to the point where patching it would be dishonest work.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sewall’s Point
Ghost Controls repair in Sewall’s Point typically runs $80 to $180 for a service call and diagnostic, and a full operator replacement can run $1,400 to $3,300 depending on the model and whether the power and wiring need updating. Hinge and post work generally lands between $200 and $550, while a new Ghost Controls swing operator with professional installation typically sits between $800 and $2,700. Every job gets a written price quoted and agreed before work starts, so you won’t get handed a bill that outgrew the conversation we had. The estimate is free. Call (855) 382-0732 and we’ll walk your gate and tell you what it actually needs.
Serving Sewall’s Point, FL — Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sewall’s Point
Prevailing salt spray off the Indian River and St. Lucie Inlet pits and corrodes the river-side hardware years faster than the street-side unit, because Sewall’s Point sits on a three-sided peninsula and the street side simply doesn’t get the same salt load. Two gates on one property genuinely need different service intervals and different hardware. Call (855) 382-0732 and we’ll assess both gates separately instead of treating them as a matched set.
Usually not. After a named storm, the gate leaf has often been racked out of square, so the operator trips limits or reverses on geometry that’s no longer plumb. We’ve seen exactly that on a river-side estate off South Sewall’s Point Road, similar to issues we address with Ghost Controls in Hutchinson Island South: the control board was fine, but the salt-side hinge barrels had seized and the storm-season post had shifted the leaf. We freed the hinges, replaced the pins with stainless hardware, re-plumbed the post, re-clocked the operator arm, and the gate has cycled on battery backup through every squall since. The motor wasn’t the problem.
Only if the enclosure or battery compartment has corroded through. If the board still tests good and only the enclosure, terminals, or leads are compromised, we replace the compromised components and keep your operator. We recommend replacement only when the housing has gone past the point where new parts would have nothing sound to mount into.
Yes, and that work starts before the first named storm of the year. We check hinge pins, actuator arms, photo-eye brackets, battery backup, and post plumb on every gate, then spec stainless and marine-grade hardware where the salt has been winning. The goal is a gate that opens on battery power when the grid is down, not a gate that needs rescuing after the storm passes. Call (855) 382-0732 to get on our pre-season service list for Sewall’s Point.
We service the whole electric gate system: the Ghost Controls operator, the AXS keypad, the photo-eye set, wireless receivers, and the intercom or access system tied into the gate. One call covers both the mechanical gate structure and the electronic component, so you aren’t stuck calling one company for the board and another for the keypad.
Service Areas Near Sewall’s Point
We serve Sewall’s Point and the surrounding coastal communities with Sewall’s Point service area coverage at the local level. For Ghost Controls owners in neighboring areas, see Ghost Controls service in North River Shores and Ghost Controls service in Verona Walk. Our base is in Miami Gardens, so Carol City, Scott Lake, Bunche Park, Lake Lucerne, and Miami Beach are all within our regular route as well.
Book Your Ghost Controls Service in Sewall’s Point Today
If your Ghost Controls gate is struggling, reversing, or refusing to move on the river side of Sewall’s Point, call us. We’ll diagnose the actual failure and give you a written price before any work starts. Reach us at (855) 382-0732 for a free estimate.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Sewall’s Point and coastal Florida with independent Ghost Controls service.