Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Westview, FL | Miami Gardens Gate Repair
We’re Miami Gardens Gate Repair, an independent Ghost Controls service provider working throughout Westview’s 33167 zip code. When your Ghost Controls operator quits, reverses mid-travel, or won’t respond to the remote, we diagnose the board, the battery, and the gate hardware itself. The difference here: Westview’s salt air, storm surges, and gate-only property access mean Ghost Controls failures in this neighborhood follow a pattern we’ve seen hundreds of times. Call (855) 382-0732 for a free estimate.
We’re not affiliated with or authorized by Ghost Controls, and that’s exactly why homeowners trust us. Our only obligation is to you. If you need Ghost Controls sales & service work done right, we’re the crew that handles it daily across Miami-Dade: swing kits, slide operators, solar units, keypads, battery backups, the whole line.
Why Westview Residents Choose Us for Ghost Controls Service
Ghost Controls openers are popular in Westview because they’re practical for DIY installation and priced reasonably for a driveway gate. But “DIY-friendly” ends when the control board corrodes or the gate sags out of alignment. That’s where we come in.
Noel Carballo, our owner and lead technician, grew up in the Scott Lake neighborhood of Miami Gardens, where half the driveways on his street had a gate that stuck, groaned, or flat-out refused to open. He studied electrical and mechanical systems at Miami Dade College’s North Campus and has spent the better part of two decades diagnosing operators, rewiring access systems, and keeping residential and commercial gates running across Miami-Dade. When a Ghost Controls board misbehaves, he’s already seen that failure mode on a dozen other Westview properties.
Our techs are factory-familiar with Ghost Controls alongside LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. That brand-spanning knowledge means we troubleshoot your Ghost Controls opener against how competing systems behave, which helps us pin the actual fault faster. No unnecessary full-unit replacements. No guessing.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Westview
- Surge-fried control boards after thunderstorms. Westview’s summer storms send power surges through older electrical panels, and Ghost Controls boards are vulnerable. The relay sticks, the gate reverses mid-travel, or the operator stops responding to remotes entirely. We replace the board, re-check the transformer, and advise on surge protection that fits how this neighborhood’s wiring behaves.
- Dead battery backups after years of heat. South Florida heat cooks batteries. Ghost Controls battery backup units that sat through three or four summers often won’t hold a charge, which means the gate dies the moment power drops during a storm or outage. We test the battery under load and swap in a fresh one when it’s dead.
- Sagging gates overloading the operator. Salted, rusted hinge and post hardware is everywhere in Westview. The gate sags, the operator works harder, and the obstruction sensing or limit switch trips constantly. We rebuild hinges, reinforce posts, and re-set the arm travel so the operator isn’t fighting the gate.
- Limit-switch and arm-mount drift on swing operators. Storm-bent or wind-misaligned gates throw the open/close travel out of adjustment. Your Ghost Controls dual-swing opener runs a few feet then reverses because the limits no longer match where the gate actually travels. We re-align, re-set limits, and test both leaves together.
- Corroded terminals and connectors. Humidity and salt air from Biscayne Bay and the Atlantic eat at low-voltage connections. Ghost Controls wiring harnesses and accessory terminals oxidize over time, causing intermittent keypad failures, flickering status lights, or remotes that work only from five feet away. We clean, re-terminate, and seal connections properly for this climate.
Ghost Controls Service in Westview: What Local Conditions Mean for Your Equipment
Westview is a dense residential pocket in Miami-Dade’s 33167 zip code. Most properties are gated at the driveway or perimeter and are entered only through that gate. When a Ghost Controls operator dies in this neighborhood, you can’t get your car out, or you can’t get your car in. That’s not an inconvenience, it’s a lockout. Which is why our Westview call-outs skew to same-week residential driveway and pedestrian-gate work on tightly spaced lots, not the large commercial gate systems we see in neighboring municipalities.
The housing stock here is mostly mid-century to late-20th-century single-family homes and modest low-rise multifamily on compact parcels. Many properties still have the original wrought-iron or chain-link perimeter fencing with gate hardware and operators that have weathered decades of sun and salt air. Ghost Controls openers are often retrofitted onto these older gates, and that retrofit creates a specific failure pattern: the new operator is fine, but the old gate underneath it isn’t. Hinges seize. Posts shift. The gate drags. The opener overloads. We repair the whole assembly, not just the motor.
After summer thunderstorms and hurricane-season wind events, technicians in this zip code see a spike in misaligned and storm-bent driveway gates and wiped-out operator control boards from power surges, the same surge pattern that hits Westview’s older electrical panels and pool equipment. If your Ghost Controls opener stopped working after a storm, there’s a strong chance the board took a hit. We carry the replacements and can usually turn that repair around in one visit.
One job that stuck with us: a homeowner off the 33167 residential blocks called because her Ghost Controls dual-swing driveway opener would run a few feet and then reverse, and the gate had begun to drag after a storm. We found the surge-fried control board paired with a sagging hinge side on the old wrought-iron leaf. We replaced the board, rebuilt the hinges, and re-set the arm travel and limits. She was back on her remote and keypad the same visit, with a battery backup check thrown in.
Ghost Controls Models & Products We Service in Westview
We work on the full Ghost Controls residential line. The Heavy-Duty Dual Swing Gate Opener kit. The Solar-Powered Single Swing Gate Opener, which shows up on Westview properties where running conduit to the gate wasn’t practical. The Slide Gate Opener with rack-and-pinion drive. And the accessories people actually use here: keypads, remotes, and battery backup units.
For parts, we fit genuine Ghost Controls boards, remotes, keypads, and batteries where the OEM part is the reliable choice. For hinges, rollers, and rack, we use quality aftermarket hardware when it’s equal or better. On a rusted-through frame or a post pulled out of the ground, we’ll tell you honestly when rebuilding the gate makes more sense than another motor. If your gate’s giving you trouble, it’s telling you something. Let’s figure out what.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Westview
Full disclosure: gate repair pricing depends on what actually failed. A limit-switch adjustment on a Ghost Controls swing operator runs far less than replacing a surge-fried control board or rebuilding a rusted gate leaf. Most Westview service calls fall into these ranges:
- Service call and on-site diagnostic: typically rolled into the repair when you proceed with the work
- Limit switch / arm travel re-adjustment: $80 to $160
- Control board replacement (Ghost Controls OEM): $220 to $390, depending on the model
- Battery backup replacement: $110 to $220
- Hinge and hardware rebuild on one gate leaf: $180 to $450
- Rack or roller replacement on a slide operator: $150 to $400
We always quote the price and get your approval before any work starts. No invoice surprises mid-job. Call (855) 382-0732 for an exact quote, the estimate is free.
Serving Westview, FL — Our Local Coverage Area
We’re based in the Westview area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Westview
My Ghost Controls swing gate reverses a few feet after opening – is it the board or the gate?
It’s usually one of two things: either the limit settings drifted (common after winds flex the gate and arm mounts) or the gate itself is sagging and tripping the obstruction sensing. We test both. If the board’s the problem, we replace it. If the hinges are the problem, we rebuild them. Either way, we’ll show you what we found before we fix it.
Will a Ghost Controls battery backup survive a Westview storm-season outage?
Only if the battery still holds a charge. Ghost Controls backup batteries degrade faster in South Florida heat. If your battery is three or more years old, there’s a decent chance it’s dead and your gate won’t open when the power drops. We load-test every backup battery on every service call. Quick fix, and it’s worth doing before the next storm. Call (855) 382-0732 to schedule a check.
Can you repair rusted Ghost Controls swing gate hardware instead of replacing the whole gate?
Usually, yes. We rebuild hinges, replace posts when needed, and repair rusted sections of the frame. The exception is when the rust has eaten through enough of the gate structure that welding new steel onto old isn’t safe. We’ll tell you straight whether repair or replacement is smarter, and the quote covers exactly what we’ll do.
Do you install or integrate Ghost Controls keypads, remotes, and intercoms on existing gates?
Yes. We add Ghost Controls keypads and remotes to existing operators, program them, and sync everything to your current board. If you want an intercom or access system that works with Ghost Controls, we handle that integration too. It’s part of the Ghost Controls sales & service work we do across Miami-Dade.
After a hurricane or thunderstorm, why does my Ghost Controls operator stop working?
In Westview, the usual culprit is a power surge that hit the control board, or moisture intrusion into the board enclosure. Salt air and humidity accelerate the corrosion. Sometimes the gate itself got shoved by wind and the arm mounts shifted. We diagnose post-storm failures all season long. Call (855) 382-0732 and we’ll get you back through your gate.
Service Areas Near Westview
From our base in Miami Gardens, we cover Westview and the surrounding neighborhoods: Miami Gardens proper, Carol City, Scott Lake, Bunche Park, and Lake Lucerne. We also reach Westview service area properties near the edges of 33167. For homeowners across the county line, we handle Ghost Controls service in Pembroke Pines and Ghost Controls service in Country Club as well.
Book Your Ghost Controls Service in Westview Today
If your Ghost Controls gate won’t open, won’t close, or won’t stop beeping at you, call (855) 382-0732. We’ll send a technician to your Westview property, diagnose the system, and give you a free written estimate before any work starts. Same-week scheduling for most residential call-outs.
Written by Noel Carballo, Owner & Lead Gate Technician at Miami Gardens Gate Repair, serving Westview and Miami-Dade from our base in Miami Gardens.