Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Wilton Manors, FL | Miami Gardens Gate Repair
We provide independent Ghost Controls gate repair across Wilton Manors, FL, with service that accounts for what this city actually throws at a solar or low-voltage swing operator. The short version: if your Ghost Controls AXS or Titan gate is reversing on its own, losing charge, or stuck mid-cycle, the cause in Wilton Manors is usually shade on the panel, salt air in the board, or a gate that shifted during storm season. Call (855) 382-0732 and we’ll diagnose it on-site.
We’re factory-familiar with Ghost Controls hardware, but we are an independent repair shop, not authorized, sponsored, or endorsed by Ghost Controls. That independence matters: we’ll tell you straight whether a board, battery, arm, or hinge is actually worth fixing, not just which part has the biggest margin. The same approach drives our Ghost Controls service in Boulevard Gardens.
Why Wilton Manors Residents Choose Us for Ghost Controls Service
Noel Carballo, our owner and lead technician, grew up in Scott Lake, where every other driveway had a gate that stuck, groaned, or refused to open. He studied electrical and mechanical systems at Miami Dade College’s North Campus, and he’s spent the better part of two decades diagnosing operators, rewiring access systems, and keeping gates running across Miami-Dade. That’s the person who answers your call, not a dispatcher reading a script.
Our technicians work on Ghost Controls solar and low-voltage swing-gate operators every week. We know the AXS and Titan control boards, the battery and solar charging quirks, and the arm geometry that gets operators into trouble on short, tight gates. For Wilton Manors specifically, we know these systems get installed in cramped pool courtyards and narrow side yards where solar panels sit in partial shade and swing clearance is measured in inches, and we bring that same expertise to Ghost Controls repair in North Andrews Gardens. We show up expecting that, because most repairs here involve both an electrical fault and a mechanical alignment issue.
We service eight other operator brands side by side: LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. That cross-brand experience means we diagnose against what your Ghost Controls system ought to be doing, and we don’t push a replacement when a $40 battery and a limit reset fixes the problem.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Wilton Manors
- Solar and battery charging failures. Wilton Manors lots are small and shade-heavy. We regularly see Ghost Controls panels mounted behind a neighbor’s fence or under a mango tree, so the battery never fully recovers and the operator dies mid-cycle or reverses at the worst moment. We test the actual charge current, not just battery voltage.
- Control-board and actuator faults after summer storms. South Florida’s humidity and lightning-surge events take out AXS and Titan boards, and the arm’s limit settings get scrambled. The gate ends up stuck open, short-cycling, or running the wrong direction. We reset, reflash, or replace the board and re-teach the limits.
- Arm and bracket fatigue on narrow gates. Wilton Manors has a lot of mid-century ranch and cottage homes with gates mounted on short posts near a property line. When the hinge sags or the post flexes, the Ghost Controls arm over-travels and strips the drive gear. We re-hang the gate and realign the arm before installing a new gear.
- Keypad and remote failures from salt air and UV. Ghost Controls wireless keypads and receivers on Wilton Manors pool and privacy gates corrode and lose pairing. The gate itself works fine, but the code stopped working. We replace the weatherproof keypad or receiver and re-pair it to your board.
- Pool-gate self-closing latch compliance failures. Under Florida pool code, a pool safety gate must self-close and self-latch from any position. When a Ghost Controls operator’s swing arc is off even a few degrees, or a hinge sags, the latch stops catching. We adjust the operator limits and re-hang the gate so it passes the swing test.
Ghost Controls Service in Wilton Manors: What Local Conditions Mean for Your Equipment
Wilton Manors is a compact, densely built island city in the 33305 ZIP where nearly every driveway gate, pool gate, and courtyard gate sits within feet of a property line. That’s not a minor detail for Ghost Controls owners. It means your solar panel’s sun exposure is often limited by the neighbor’s fence and shade trees, not anything on your side of the property — a challenge we also solve with Ghost Controls service in Oakland Park. It means your operator’s swing clearance was probably compromised at installation because there simply wasn’t room for a full-size swing arc. And it means a repair van often can’t pull into the driveway, so we work from the street and carry tools through a side path or alley.
On a cottage-style lot off Wilton Drive, we were called to a Ghost Controls AXS solar swing gate on a pool courtyard that kept reversing halfway open. We found the panel shaded by a neighbor’s fence and a battery that never recovered, plus a hinge that had sagged after storm-season wind loads. We replaced the battery, reset the control board limits, and re-hung the gate so the self-closing pool latch passed its swing test. The van stayed on the street.
Ghost Controls Models & Products We Service in Wilton Manors
We service the full Ghost Controls residential line: the AXS Series solar swing-gate opener kits (AXS1 single, AXS2 dual), the Titan Series TDS2 dual-gate operator kits, the Heavy-Duty Single Swing Gate Opener (TSS1), and the accessory line including keypads, photo-eye kits, and remote/receiver sets. For parts, we use Ghost Controls OEM control boards, arms, and batteries where they’re still available, and we specify quality aftermarket brackets, hinges, and weatherproof keypads where OEM equivalents are undersized for a salt-air, UV-heavy yard. We’ll tell you plainly when a tired Ghost Controls operator on a good gate is worth repairing versus replacing the whole kit. Most boards and batteries are on our truck or available same-day from local supply houses.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Wilton Manors
Ghost Controls gate repair in Wilton Manors typically runs $150 to $450 for most common fixes. A battery replacement or limit reset usually lands between $150 and $250. A control board replacement runs $250 to $400 with the part. Keypad or receiver replacement typically runs $120 to $200. Motor or actuator repair, including labor, runs $180 to $350. Arm and hinge realignment with post reinforcement runs $200 to $400, depending on how far the gate has shifted. Emergency or after-hours service adds $80 to $150 to the base. Prices are quoted and agreed before any work starts, never after. For an exact quote on your Ghost Controls system, call (855) 382-0732. Estimates are free.
Serving Wilton Manors, FL — Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well, and we also offer Ghost Controls repair in Sunrise. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Wilton Manors
A Ghost Controls gate that reverses or stops halfway is usually a battery that never recovered because the solar panel sits in partial shade, which is common on Wilton Manors’ tight lots where a neighbor’s fence or tree blocks the panel. It can also be a hinge that sagged and threw the arm out of alignment. We test both on-site. Call (855) 382-0732 and we’ll diagnose the actual cause, not guess.
Yes, but only if the operator limits, hinge alignment, and self-closing latch are all working together. Florida pool code requires self-closing and self-latching from any position, and a Ghost Controls arm that’s slightly out of alignment will cause the latch to miss. We adjust the operator and re-hang the gate so it passes inspection.
We use Ghost Controls OEM control boards, arms, and batteries where they’re still available and the right option for your gate. We’ll also tell you when an aftermarket battery or bracket is the smarter buy for a salt-air Wilton Manors yard. The parts decision is always discussed with you before we install anything.
Usually not. A Ghost Controls keypad that stopped working in Wilton Manors is typically corrosion on the keypad contacts or a receiver that lost pairing from humidity and salt air. The operator itself is often fine. We test the keypad, the receiver, and the board before recommending any replacement.
Yes, we’re used to it. Wilton Manors driveways and side paths are often too tight for a work van, so we park on the street and carry tools in. It takes a few extra minutes and we plan for it. Call (855) 382-0732 and describe your access; we’ll tell you if we need to park anywhere specific.
Service Areas Near Wilton Manors
Along with Wilton Manors, our Ghost Controls service covers the surrounding areas. We regularly work gates in Westwood Lake, Glenvar Heights, Miami Gardens, Carol City, Scott Lake, Bunche Park, Lake Lucerne, and Miami Beach. For more on the wider Wilton Manors service area, see our local page.
Book Your Ghost Controls Service in Wilton Manors Today
If your Ghost Controls gate is giving you trouble, it’s telling you something. Let’s figure out what. Call (855) 382-0732 for a free estimate and we’ll send a technician who knows Ghost Controls hardware and Wilton Manors lots. Same-day service is available for most Ghost Controls failures we see in 33305. If you’d like to see the full scope of our Ghost Controls sales & service, that page covers the whole brand line.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Wilton Manors and Miami-Dade County.