Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunset
Most gate repairs in Sunset come down to one of three problems: a track rusted out from lake-side moisture, a post that settled because water pooled at its footing, or a builder-grade operator that never had the power run it needed in the first place. We fix all three, usually in a single visit. Miami Gardens Gate Repair runs a dedicated gate-only service truck into Sunset, and when you call (855) 382-0732, you reach a technician who works on gates every day; not a handyman squeezing you in between a water heater and a garage door. We know the streets around SW 72nd, the canal-side lots, and the 1970s-era sliding gates that swing out over them.
Why Sunset Calls Miami Gardens Gate Repair
The neighborhoods around Kendale Lakes and the older subdivisions along Sunset Drive send us the same calls every season; gates that stuck after rain, operators tripping breakers, and swing gates sagging off their hinge posts. We’re a gate repair crew, not a fencing company or a general contractor. That single-trade focus means every diagnostic tool on our truck, every replacement part we stock, and every hour of training our techs get is aimed at one thing: getting your gate opening and closing the way it should.
When a Sunset customer describes a Gate Repair problem over the phone, we usually know the likely culprit before we arrive. A LiftMaster on a canal-side lot that binds partway through its travel? Rack and pinion corrosion, or a settled hinge post. A Mighty Mule that randomly reverses? Undersized wire from the house panel to the operator. That kind of diagnostic instinct comes from repairing hundreds of gates across the same ZIP codes, not from reading a manual on the way over.
We answer our own phone, we show up when we say we will, and our price is quoted and agreed before any work starts. You will not get an invoice that looks different from the estimate.
Styles & brands we work with
Metal Gate Repair in Sunset
Metal gate repair in Sunset almost always involves corrosion; either on the track, the hinges, or the post itself. The aluminum and ornamental steel gates on 1970s to 1990s lots here were built to a certain standard, but decades of humid subtropical air, salt carried in off the Atlantic, and water that pools along fencelines near Sunset’s lakes and canals all work against them. A typical metal gate repair in Sunset runs $220 – $480 for hinge replacement and realignment, while track replacement on a sliding driveway gate lands closer to $450 – $850, depending on the gate’s weight and the condition of the concrete pad beneath it.
Track and Roller Replacement
Sliding gates, the big ones that roll across driveways on a bottom track, fail differently from swing gates. In Sunset, ground moisture wicks up into the steel track, rust forms, and the rollers start binding. Eventually the gate shudders, stalls, or pulls off the track entirely. We replace the rusted track with corrosion-resistant materials and re-bed the anchors so the gate rides true again, not just quieter but straight.
Hinge, Weld, and Post Repair
When rust compromises a hinge barrel or the weld where it meets the gate frame, a repair patch will not hold; the metal has to be cut out and replaced. That is bread-and-butter work for our crew. We also see posts that look fine above ground but have rotted or cracked below the soil line, and no amount of hinge adjustment fixes a post that is no longer plumb.
Wood Gate Repair in Sunset
Wood gate repair in Sunset deals with a different enemy: moisture and the warping it causes. The fenced lots here, particularly where they back up to lakes and drainage canals, hold ground moisture against the bottom of wood gates and their posts far longer than inland properties do. A wood gate in Sunset that drags on the ground one month and not the next is a moisture problem, not a hinge problem. Typical wood gate repair in Sunset runs $180 – $400 for hinge and latch replacement with realignment, and $500 – $900 when a rotted post or frame section needs to be replaced and the gate rebuilt around it.
Post Replacement and Setting
Wood posts set in concrete can still fail when water sits at the base year after year. The rot travels up from the bottom, and one day the whole gate leans. We pull the old post, set a pressure-treated or cedar replacement in drainage gravel, and re-hang the gate so it clears the ground with room to spare for a season of puddled water.
Realignment for Pool and Backyard Gates
Pool-enclosure gates and backyard access gates see less traffic than driveway gates, but they fail just as often because they sit in shaded corners where moisture never fully dries. We realign sagging wood gates, replace latch hardware with corrosion-resistant versions, and plane or trim the gate edge when heat and humidity have made the boards swell past their original fit.
Trusted Brands We Service in Sunset
We are factory-familiar with the operators Sunset homes actually have, and that makes a difference in how fast we can fix them. If your gate has a LiftMaster, FAAC, Elite, or Mighty Mule badge on the arm, we have worked on that exact model’s control board, limit switches, and motor before. Since Sunset is a retrofit market, most of the operators we see were added to gates years after the original build; some were installed right, and many were not. We diagnose against the manufacturer’s specs, not just guesswork. We stock common LiftMaster and FAAC boards and remotes locally, which means fewer days waiting on parts for Sunset customers.
Common Gate Repair Problems We See in Sunset Homes
- Rusted tracks and rollers on sliding gates. Canal-side and lake-side lots put moisture into the track that inland homes never see. By the time a gate starts jerking or squealing, the track has usually been rusting for years.
- Settled posts from soft, wet ground. Sunset’s built-out lots sit on soil that stays damp near water features and along fencelines with poor drainage. A post that was plumb in 1995 can be two inches out of line today.
- Builder-grade operators tripping breakers or failing early. Newer operators on undersized wire have a short life. The control board sees voltage drop, the motor heats up, and the opener either trips or quits. We fix the power run first, then the operator.
- Missing entrapment protection on retrofit automation. A gate that was manual for 20 years and got an operator bolted on may have no photocells or edge sensors. Under UL 325, that is a safety failure; and a liability for the homeowner. We add the protection that should have been there from day one.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sunset, FL
Here are the numbers we quote most often over the phone for Sunset customers. A hinge and realignment job on a wood or metal swing gate: $180 – $400. Track and roller replacement on a sliding driveway gate: $450 – $850. Post resetting with concrete work: $350 – $700, depending on access and whether the gate is in or out of water. A full diagnosis on an electric operator runs $129, which is credited toward the repair if you approve it. The variable is almost always what we find when we excavate around the post or open the operator housing. You get the exact price before we start work. Call (855) 382-0732 for a free estimate.
We Also Serve Cities Near Sunset
Our gate repair trucks cover Sunset and the surrounding communities: Olympia Heights, Westwood Lake, Richmond Heights, and Kendale Lakes. If your property sits near the boundaries of these neighborhoods, call us and we will confirm coverage by your exact cross streets. We dispatch to the whole area with the same gate-only focus.
Serving Sunset, FL — Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunset
Sagging in Sunset is usually a post or track problem driven by moisture. The neighborhoods here sit closer to lakes and canals, and that ground water softens the soil around gate posts and rusts sliding-gate tracks. A gate that sags here usually needs a post footing reset or track replacement, not just a hinge adjustment. Call (855) 382-0732 and we will tell you which one you are dealing with.
Yes. We retrofit operators to existing swing gates regularly in Sunset, and the job starts with checking the gate’s weight, post condition, and the available power run. Many older manual gates here were never wired for an operator, so we may need to add a dedicated circuit and conduit. We also install the required safety photocells or edge sensors so the finished job meets UL 325. Estimates are free; call (855) 382-0732.
The most common issue is inadequate power and wiring. Builders sometimes run undersized wire to the gate location or skip the conduit entirely, and the operator can not draw the current it needs. That causes tripping breakers, slow opening, and premature motor or board failure. We correct the power run and then repair or replace the operator if it has been damaged. Call (855) 382-0732 for a diagnosis.
If the gate leans, catches the ground at one corner, or swings open on its own, the post footing is the likely culprit. In Sunset, the first sign is often a visible gap between the post base and the surrounding concrete or soil. Once the post has moved more than a few degrees, adjusting hinges will not hold; the footing needs to be dug out, re-set, and the post re-leveled. We quote that work before starting. Call (855) 382-0732.
We service both. Metal gates here need corrosion-resistant hardware and track work; wood gates need realignment, post replacement, and hardware that can handle trapped moisture. A single call covers either. Call (855) 382-0732 and describe your gate; we will tell you what it likely needs and what it will cost.
Call Miami Gardens Gate Repair for Service in Sunset
If your gate is sticking, sagging, or stopped, call (855) 382-0732. We will diagnose it over the phone where we can, quote your repair before we touch a tool, and send a gate technician to your Sunset property who works on nothing but gates. Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Sunset with dedicated gate repair since day one.