Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Marco, FL
Gate installation in Marco, FL starts with understanding what the salt air does to metal, and what hurricane wind does to a gate that’s not engineered for it. Most Marco homes were built between the 1970s and early 2000s: stucco-on-block single-family homes and low-rise condos, many with ornamental aluminum or wrought iron driveway gates, pool enclosure gates, and community entry gates set into concrete or paver driveways near saltwater canals. We handle every part of that job, from the first measurement to the final control board programming, because gates are the only trade we work in. Call (855) 382-0732 when you want a straight answer on what your Marco gate needs.
Why Marco Homes Are Different
Marco Island is a barrier island, and that single fact changes nearly every gate job here. Salt-laden Gulf air moves through every neighborhood off Collier Boulevard, and it works on gate hardware year-round: hinges seize, welds corrode from the inside out, aluminum posts pit, and steel bottom rails rust through where lawn irrigation keeps the lower edge wet. An inland gate tech might call a rusty hinge normal wear. On Marco, we call it a predictable failure point and plan for it.
The housing stock compounds the issue. Homes from the 1970s through the 2000s often have ornamental gates that look pristine on the surface but hide rust at the welds and bottom rails, which is exactly where saltwater canal moisture and storm surge collect. Many canal-front properties also have gates that double as pool safety barriers, so a gate repair here is never just about the hinge. It’s about keeping the gate compliant, the latch throwing properly, and the self-closing mechanism working the way Florida pool code requires. Add in HOA-managed community entrances along Collier Boulevard where property managers need work scoped and approved before we touch a post, and Marco gate work becomes a coordination job as much as a mechanical one.
Styles & brands we work with
Our Main Marco Services
The two services Marco homeowners and property managers call about most are gate repair and electric gate repair, and each has its own detailed page on this site.
Gate Repair in Marco
Gate repair on Marco means dealing with what salt air, wind, and time have done to the gate structure itself: sagging leaves, seized hinges, rusted posts, bent tracks on sliders, latches that no longer catch, and ornamental aluminum that’s cracked at a weld. We work on gates from LiftMaster, FAAC, Mighty Mule, and Elite, and we know how each of them behaves after years in a marine environment. When a gate won’t close or a post is leaning, we diagnose the whole structure, not just the visible failure. Gate Repair in Marco has the full breakdown of what we fix and what it costs.
Electric Gate Repair in Marco
Electric gate repair in Marco is the salt-air electronics problem: control boards corroding, limit switches failing, loop detectors reading false, and motors that run slow or not at all after storm-driven moisture gets inside the housing. This is the work that separates a gate specialist from a generalist, because the fix is rarely just the part that stopped. We trace the whole circuit, from the actuator back to the board, and on Marco we always check for corrosion at the connectors first. Electric Gate Repair in Marco covers our diagnostic process and pricing in detail.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Marco
A new driveway gate or community entry gate in Marco has to hold up to salt spray, high humidity, and hurricane-season wind loads, and it has to be installed on concrete or paver driveways that were laid decades ago. We measure, spec, and install gates that fit the existing posts and terrain, and we coordinate with HOAs when the gate is at a shared entrance. Whether you need a single residential swing gate or a dual sliding gate at a community entry, see Gate Installation for the full scope of what we build.
Automatic Gate Installation
Signs you need it
A manual gate that must be opened from the car every time, a gate that swings too freely in Marco winds, or a property where security requires controlled access are all signals that an automatic system is the right upgrade.
What it costs in Marco
In Marco, automatic gate installation typically runs $3,000 – $9,000 depending on gate size, operator type, and the condition of the existing posts and driveway surface.
How we do it
We measure the gate leaf and post spacing, check the driveway grade, mount the operator, run the conduit and wiring, program the control board, and set the limit switches and safety edges before testing every cycle.
Driveway Gate Installation
Signs you need it
A rusted or sagging driveway gate, a gate that drags on the pavers, or a home where the existing gate no longer matches the scale of the property are the most common triggers for a new driveway gate on Marco.
What it costs in Marco
Driveway gate installation in Marco typically runs $1,500 – $7,000, with the wide range driven by gate material, width, and whether you’re replacing just the gate leaf or the posts and operator too.
How we do it
We remove the old gate, set or reset the posts in concrete if needed, hang the new gate, align the hinges and latch, and attach the operator if the gate is automatic, then adjust the travel and closing force.
What Gate Installation Costs in Marco
| Item | Typical range in Marco |
|---|---|
| Automatic gate installation | $3,000 – $9,000 |
| Driveway gate installation | $1,500 – $7,000 |
| Sliding gate installation | $4,000 – $12,000 |
How long does gate installation take in Marco?
Most residential gate installations in Marco take one to three days, depending on concrete curing time for posts and whether we’re running new electrical to the gate location. We schedule around HOA approval when the gate is at a community entry.
Do you handle the permits and HOA approval for gate installation?
We prepare the specs and drawings your HOA or property manager needs to approve the gate, and we coordinate with them directly on Collier Boulevard properties. Call (855) 382-0732 to get the process started with a free estimate.
Brands We Service in Marco
We work on LiftMaster, FAAC, Mighty Mule, and Elite gates and operators across Marco, and we keep common replacement parts stocked for all of them. When a part isn’t on the truck, we know exactly what to order and how long it takes to arrive. Our brands page has the complete list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Marco, FL
| Service | Typical range in Marco |
|---|---|
| Gate repair | $150 – $850 |
| Electric gate repair | $180 – $650 |
| Control board replacement | $250 – $750 |
| Motor or actuator replacement | $350 – $1,200 |
| Hinge replacement | $150 – $450 |
| Post replacement or reset | $300 – $900 |
| Automatic gate installation | $3,000 – $9,000 |
| Driveway gate installation | $1,500 – $7,000 |
| Sliding gate installation | $4,000 – $12,000 |
On Marco, corrosion is the main price driver: a gate that looked fine from the outside often has rust inside the post or along the bottom rail once we start disassembly, and that adds labor and parts to the job. What never changes is that we quote the full price before any work starts, and you approve that number before we touch a single bolt.
Neighborhoods We Serve in Marco
We cover every zip code and community in Marco, 34146, and we know the gate conditions you’re dealing with block by block: older canal-front homes with rusted ornamental gates, gated communities along Collier Boulevard with shared entry systems, and newer builds where the gate operator was never truly set up for wind load. We typically respond to Marco calls the same day for repairs and schedule installations within the week.
- Cape Marco
- Marco Shores
- Old Marco
- Hideaway Beach
- Tigertail Beach area
Service Area – Cities Near Marco
Our Marco crew also handles gate work in the communities right around the island. If you’re in Marco Island, FL proper, Lely Resort, FL, Verona Walk, FL, or Lely, FL, the salt-air conditions and gate hardware you’re dealing with are the same ones we see every day on Marco.
Serving Marco, FL — Our Local Coverage Area
We’re based in the Marco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Marco
For emergency repairs like a gate stuck open or a failed operator, we typically reach Marco addresses the same day. Non-emergency repair calls are scheduled within one to two days, and installations are booked within the week.
For most single-family homes, no. For community entry gates or gates on HOA-managed property along Collier Boulevard, yes, and we prepare whatever scope-of-work documentation your property manager requires before the job starts.
Do you give free estimates for gate work in Marco?
Yes. Every estimate is free, and the price we quote is the price you approve before work begins. Call (855) 382-0732 to get a Marco gate professional on site and a written number in hand.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marco Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Michelle Whitaker"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Adriana Reyes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jennifer Bennett