Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Melbourne, FL
Gate installation in Melbourne means planning for salt air, sandy soil, and hurricane-season wind. A barrier-island home off A1A needs marine-grade hinges and corrosion-resistant operators, while a mainland HOA off Wickham Road usually needs a clean aluminum slide or swing gate that matches community standards. We handle both, and everything between. If you need a new gate designed, built, and automated, call (855) 382-0732 for a free on-site estimate.
Why Melbourne Homes Are Different
Melbourne’s housing stock splits into two very different service environments. Near downtown and Eau Gallie, you’ll find 1950s and 60s ranch homes where original driveway gates, if they survive at all, are worn steel or chain-link with decades of rust. Out in the 32904, 32934, and 32935 corridors, the 1980s-to-2000s stucco-and-block subdivisions lean heavily on aluminum and vinyl gates maintained by HOAs. Then there’s the barrier island, including Viera in 32940 and the condo clusters along the coast, where salt-laden onshore breezes eat through standard steel hardware fast. We’ve pulled control boards from beachside LiftMaster operators that look like they’ve been sprayed with brine. Inland, the bigger issue is sagging posts: sandy, shifting soil under Melbourne’s subdivisions lets gate posts lean and drag, especially after heavy rain or storm surge. A gate company working this city has to stock both corrosion-resistant hardware for the island and reinforcement components for the mainland.
Styles & brands we work with
Our Main Melbourne Services
Most Melbourne calls fall into two categories: the gate won’t move at all, or the gate moves but the automation has failed. We cover both, from the hinges to the control board.
Gate Repair in Melbourne
A sagging gate off Post Road or a rusted hinge on a beachside property off A1A is a mechanical problem, not an electrical one. We assess the post, the hinge brackets, the wheel or roller condition, and the gate’s overall geometry. Salt corrosion and shifting soil both accelerate mechanical wear here, so we quote the repair with those local factors already factored in. Gate Repair in Melbourne covers everything from a bent hinge to a post that needs to be pulled and reset.
Electric Gate Repair in Melbourne
When a gate opens but won’t close, or a keypad works but the remote doesn’t, the problem is in the operator, the control board, the loop detector, or the access system. We carry parts for LiftMaster, FAAC, BFT, and Linear, and we diagnose the system, not just the symptom. Barrier-island homes see control-board failures at roughly twice the inland rate because of humidity and salt. Electric Gate Repair in Melbourne gets into the full diagnostic scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Melbourne
New gate installation in Melbourne is a different job depending on whether you’re on the barrier island or the mainland. A beachside home off A1A needs a gate that won’t rust out in five years, which means stainless or marine-grade hardware, sealed control boxes, and an operator rated for constant salt exposure. A mainland home in a subdivision off Minton Road or Wickham Road usually needs a clean aluminum slide or swing gate that satisfies HOA standards and holds up to shifting sandy soil. We measure, quote, and build for the specific conditions of your property. Gate Installation is the full service, from single residential swing gates to dual sliding systems.
Automatic Gate Installation
Signs you need it
A manual gate that gets opened and closed multiple times a day, or a property where you want controlled access without getting out of the car, is a candidate for automation.
What it costs in Melbourne
Automatic gate installation in Melbourne typically runs $2,500 to $7,500 depending on operator type, gate weight, and power access.
How we do it
We mount the operator, run power to the location, install safety edges or photo eyes, and program remotes and keypads to match your access needs.
Gate Installation Services
Signs you need it
A gate that’s rotted, sagging, dragging, or too damaged to close properly is past repair and ready for replacement.
What it costs in Melbourne
Full gate installation services in Melbourne typically range $1,800 to $4,500 for a standard residential aluminum gate.
How we do it
We remove the old gate, set new posts, hang the new gate, adjust swing or slide geometry, and test everything before we leave.
Electric Gate Installation
Signs you need it
A new build, a gate that was never automated, or an HOA requirement for controlled access means it’s time for a powered gate.
What it costs in Melbourne
Electric gate installation in Melbourne typically runs $2,500 to $6,000 including the operator and basic access control.
How we do it
We spec the correct operator for gate size and weight, run and protect the electrical, mount the operator, and wire the control board and safeties.
Driveway Gate Installation
Signs you need it
Any driveway without a gate that should have one, whether for privacy, child safety, or keeping vehicles off the property, qualifies.
What it costs in Melbourne
Driveway gate installation in Melbourne typically runs $2,500 to $7,500 for a single swing or slide gate with automation.
How we do it
We survey the driveway slope and width, set posts or a track, hang the gate, and automate with the right operator and safety system.
What Gate Installation Costs in Melbourne
| Item | Typical range in Melbourne |
|---|---|
| Aluminum gate installation | $1,800 – $4,500 |
| Wrought iron or steel gate installation | $2,200 – $6,000 |
| Automatic gate installation (operator included) | $2,500 – $7,500 |
Do I need HOA approval to install a gate in Melbourne?
Most likely yes, if you live in a subdivision with an HOA in the 32940, 32935, or 32934 corridors. We provide the specs and drawings your board will ask for, and we install to match existing community gate styles.
How long does a gate installation take in Melbourne?
A standard single driveway gate usually takes one full day. For automated gates or dual sliding systems, plan for two days including electrical and programming. The price is always agreed before we start.
Brands We Service in Melbourne
We’re factory-familiar with LiftMaster, FAAC, BFT, and Linear, and we stock common boards, remotes, and safety components for these brands locally. That means less waiting on parts and fewer return visits. See our brands for the full range of operators we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Melbourne, FL
| Service | Typical range in Melbourne |
|---|---|
| Gate operator installation | $800 – $1,800 |
| Control board replacement | $350 – $950 |
| Hinge and bracket repair | $150 – $500 |
| Aluminum gate installation | $1,800 – $4,500 |
| Wrought iron or steel gate installation | $2,200 – $6,000 |
| Automatic gate installation (operator included) | $2,500 – $7,500 |
| Electric gate installation | $2,500 – $6,000 |
| Driveway gate installation | $2,500 – $7,500 |
On the barrier island, expect a small premium on hardware because stainless and marine-grade components cost more than standard steel. Sandy mainland soil sometimes means deeper post footings, which adds labor. Every Melbourne quote is fixed before work begins, so there’s no surprise line item at the end.
Neighborhoods We Serve in Melbourne
We work throughout Melbourne, from downtown and Eau Gallie up through the mainland subdivisions and out to the barrier island. Response times are tight across the city because we’re dispatched from a local base, not from Miami or Orlando.
- Eau Gallie
- Downtown Melbourne
- Viera (32940)
- Wickham Road corridor
- Post Road and Minton Road communities
Service Area – Cities Near Melbourne
Our Melbourne crew also handles gate work across the surrounding area, including West Melbourne, FL, June Park, FL, Indialantic, FL, and Palm Bay, FL. If your gate is down and you’re just outside Melbourne, call anyway – we’ll dispatch to the nearest available technician.
Serving Melbourne, FL — Our Local Coverage Area
We’re based in the Melbourne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Melbourne
Most Melbourne calls get same-day or next-day service, depending on the part needed. Emergency gate-down jobs on the mainland or barrier island are prioritized because a stuck gate can block a driveway entirely. Call (855) 382-0732 and we’ll give you a straight answer on timing.
Yes. Many Melbourne subdivisions in 32940 and 32935 have strict HOA specs for gate height, material, and color. We work from your community’s guidelines and install to match, so you don’t get a violation letter after the job.
We cover all of Melbourne, including ZIPs 32940, 32941, 32901, and 32902, plus nearby cities like West Melbourne, June Park, Indialantic, and Palm Bay. If you’re on the barrier island or in a mainland HOA, you’re in our service area.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Melbourne Customers Say
"Showed up when they said they would. That's most of the battle."
— Rosa Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Andres Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tara Sullivan