Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Micco, FL
Gate installation in Micco usually means building for salt air, sandy soil, and a driveway that may not be paved. Most homes here are single-story concrete-block or wood-frame builds from the 1960s through the 1980s, and many properties include a detached workshop, carport, or dock-side shed with its own welded-steel gate. That’s the work we do at Miami Gardens Gate Repair. We install automatic and manual gates that hold their alignment through humid summers and tropical-storm season, and we do it in Micco every week. Call (855) 382-0732 for a free measure and a written price.
Why Micco Homes Are Different
Micco sits along the Indian River in the 32976 ZIP, where lots are large, roads are quiet, and the air carries salt off the water nearly year-round. That onshore air is the single biggest factor in how gates wear here. Hinges rust faster than they do ten miles inland. Chain-link fabric pits. Powder-coated steel starts to blister around bolt holes within a few seasons. A gate that looks serviceable from the driveway often has hidden corrosion at the post base, which is exactly where we start every inspection.
The soil is the second factor. Micco is built on sandy ground that drains fast but shifts with heavy rain and storm surge. When a post moves even half an inch, a swing gate stops latching and a slide gate starts dragging. Many older Micco properties never had concrete footings poured for their gate posts; they were set directly in sand and shell, which worked until it didn’t. We re-set posts in shellcrete, a local mix of shell and concrete that resists movement far better than a plain concrete pour in this soil.
And the gates themselves are different here. This is a canal-laced, low-density community. A lot of the gates we service in Micco aren’t decorative driveway gates. They’re heavy welded-steel swing and slide gates protecting private boat ramps, dock lockers, and backyard equipment yards. These gates are bigger than a standard residential gate, they’re usually unpainted or minimally finished, and they’re exposed to full sun and salt wind all day. That changes the hardware we choose, the hinge weight ratings, and the way we set the posts. Micco gate work is its own discipline.
Styles & brands we work with





Our Main Micco Services
Most Micco calls come down to two things: a gate that won’t move the way it should, or an electric gate that stopped responding to its opener. Here’s how each one works in this part of Brevard County.
Gate Repair in Micco
Gate repair in Micco usually starts with rust and alignment, not with the gate itself. Salt air corrodes hinges and latches, and sandy soil lets posts drift out of square. We repair and replace hinge sets, latch hardware, track rollers, chain-link fabric, and bent frame sections. We also re-set posts that have shifted after a storm. If you’re in Micco and your gate drags, won’t latch, or sags toward the latch side, this is the service you need. Gate Repair in Micco covers the full diagnosis and the fix for manual and automatic gates alike.

Electric Gate Repair in Micco
When an electric gate in Micco won’t open, the problem is usually in the electronics: a control board, a loop detector, a limit switch, or a motor that’s been fighting salt corrosion on its terminals. We diagnose the whole system, not just the symptom. That means checking the operator, the safety edges, the keypad, and the power supply as one connected job. Micco’s humidity accelerates connection corrosion, so we inspect and seal every termination we touch. Electric Gate Repair in Micco covers operators from BFT, Linear, Viking, Ghost Controls, and the rest of the major brands.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Micco

Gate installation in Micco is a full-service job: we build for the ground, the weather, and the way you actually use the gate. Most Micco properties are 1960s-80s single-story homes on large lots, and many have detached workshops, carports, or dock-side storage sheds that need their own gate. Salt-laden air and shifting sandy soil mean we overbuild the post footings and choose hardware rated for coastal exposure from the start. Whether you need a single residential swing gate or a dual sliding operator for a commercial yard, Gate Installation is measured, ordered, and scheduled properly – never rushed.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand every day, or you have newer vehicles and visitors who can’t easily get in and out.
What it costs in Micco
Automatic gate installation in Micco typically runs $3,850 to $9,100 for a single operator with keypad and safety edges, going higher for dual swing or slide systems on larger openings.
How we do it
We measure the opening and gate weight, pour through-footings in shellcrete, mount the operator on a reinforced pad or post, run low-voltage wiring in conduit, and program remotes, keypad codes, and safety settings.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your gate swings across space you can’t spare, and a slide track would work better for the property.
What it costs in Micco
Sliding gate installation in Micco typically runs $4,300 to $10,700, with the range driven by track length, gate weight, and whether an automatic operator is included.
How we do it
We set a concrete track base with proper drainage, hang the gate on rated rollers, align the guide posts, and add an operator and safety loops if the gate is automated.
What Gate Installation Costs in Micco
| Item | Typical range in Micco |
|---|---|
| Single automatic swing gate with operator and keypad | $3,850 – $6,400 |
| Dual automatic swing gate system | $6,100 – $9,100 |
| Sliding gate, manual or automatic | $4,300 – $10,700 |
What does a full gate installation include in Micco?
A full installation includes the gate itself, post footings, hinges or track hardware, an operator if automatic, keypad or remote access, safety edges, and final alignment. You get a written line-item price before any work starts. Call (855) 382-0732 for a free measure.
Do you handle the power run and safety edges on a new Micco gate?
Yes. We run low-voltage wiring to the operator, install the safety edges and loop detectors, and program the access systems. Nothing is left for a second contractor. Call (855) 382-0732 to schedule a site visit.
Brands We Service in Micco
We work on BFT, Linear, Viking, and Ghost Controls operators among the nine major brands we carry parts for. We stock common control boards, loop detectors, and safety edges locally, which shortens turnaround on Micco repairs significantly. Our brands page lists the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Micco, FL
| Service | Typical range in Micco |
|---|---|
| Gate repair – hinge, latch, or track replacement | $185 – $485 |
| Gate post re-setting in shellcrete | $420 – $1,050 |
| Electric gate diagnostics and control board repair | $260 – $710 |
| Electric gate motor replacement | $580 – $1,740 |
| Loop detector replacement | $320 – $710 |
| Single automatic swing gate installation | $3,850 – $6,400 |
| Dual automatic swing gate installation | $6,100 – $9,100 |
| Sliding gate installation | $4,300 – $10,700 |
In Micco, the two things that push gate pricing up are salt corrosion that has spread into the post or frame, and soil movement that requires digging out and re-setting post footings. Every job gets a written, line-item price agreed before work begins. Call (855) 382-0732 for a free estimate.
Neighborhoods We Serve in Micco
We cover all of Micco’s 32976 ZIP, from the canal-front properties along the Indian River to the larger inland lots off Micco Road and Barefoot Boulevard. Response time for a repair call in Micco is usually same day or next morning.
- Indian River canal-front properties
- Micco Road corridor
- Barefoot Boulevard area
- U.S. 1 frontage and side streets
Service Area – Cities Near Micco
We also run calls throughout southern Brevard County. If you’re just north of Micco, we serve Grant-Valkaria, FL and Malabar, FL. South of Micco, we cover Sebastian, FL and Roseland, FL. Same team, same coastal gate focus.
Serving Micco, FL — Our Local Coverage Area
We’re based in the Micco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Micco
Most Micco repair calls are scheduled same day or next morning. If a gate is stuck open or won’t close, call (855) 382-0732 and we’ll get someone dispatched as quickly as the schedule allows.
Permit requirements vary by property and gate scope. For most residential gate installations on private lots, a permit is not required, but we always verify with Brevard County before starting work. Any needed permit is handled before we break ground.
Yes. We repair and upgrade gates regardless of who installed them. Our technicians work across all major gate brands, so we don’t need to replace a system just because we weren’t the original installer. Call (855) 382-0732 for a repair assessment.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Micco Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Gilbert Flores"Showed up when they said they would. That's most of the battle."
— Rosa Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Andres Salazar