Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunrise, FL
Gate installation in Sunrise, FL means working with communities built in the 1980s, 1990s, and early 2000s, where original slide and swing gate hardware is now hitting the end of its service life. Between the humidity, the salt-laden air, and the near-daily afternoon storms, operators and control boards here fail faster than they would in drier climates. Miami Gardens Gate Repair has served Sunrise since 2012, and we handle everything from a single residential driveway gate to community-entry systems that see hundreds of cycles a day. If you need a gate installed, repaired, or diagnosed in Sunrise, call (855) 382-0732 for a free estimate.
Why Sunrise Homes Are Different
Sunrise packs a lot of gated living into a relatively compact footprint, and that changes how gate work gets done here. The city’s 55+ communities and HOA subdivisions, many of them built between 1985 and 2005, run on shared driveway and community-entry gates that take far more abuse than a private residential gate ever does. A single-family gate might cycle 10 or 12 times a day. A community gate off Sunrise Lakes Drive or near Welleby Park might cycle 300 times before lunch, with delivery trucks, landscapers, and residents all punching in keypad codes at the same morning hour.
That volume means boards and property managers in Sunrise don’t just need a gate fixed. They need it fixed on a schedule, with a repair report they can file, and with parts that won’t fail again in six months. The humidity and salt air in Sunrise, even several miles inland, accelerate corrosion on hinges, tracks, and control-board terminals. Lightning from summer storms takes out photo-eye sensors and circuit boards with regularity. We stock surge protection and marine-grade hardware because a gate in Sunrise without them is a gate that will be down again by October.
The housing stock itself dictates the work. Most of Sunrise is single-family homes and low-rise villas in master-planned communities. Original slide gates in those neighborhoods are reaching the age where the rollers, the chain, the motor, or all three need replacement. Swing gates are showing hinge fatigue and actuator wear. None of this surprises us when we pull up to a Sunrise job. It’s what we expect to see, and it’s usually what we find.
Styles & brands we work with
Our Main Sunrise Services
Most calls we take in Sunrise fall into two buckets: a gate that’s mechanically broken and a gate whose electronics have failed. Here’s what each one looks like on the ground.
Gate Repair in Sunrise
Mechanical gate repair in Sunrise covers the physical structure: hinges, rollers, tracks, chains, posts, and the gate frame itself. In older Sunrise communities, we regularly see gates that have sagged on their hinges, rollers that have ground flat, and tracks that have filled with sand and rust. The constant humidity eats at steel hardware, and a gate that scrapes the ground today will seize entirely in a few weeks. Our techs know how to diagnose the mechanical fault behind the symptom, not just lift the gate enough to get it moving again. For the full scope of what we repair, see our Gate Repair in Sunrise page.
Electric Gate Repair in Sunrise
When a Sunrise gate won’t open from the keypad, or the remote stopped working, or the gate arm reverses halfway through a cycle, the problem is usually electrical. That means the operator, the control board, the loop detector, the photo-eye sensors, or the wiring between them. Sunrise’s lightning storms are hard on circuit boards, and the humidity corrodes terminal connections. We diagnose the whole system, from the keypad to the actuator, instead of swapping parts one at a time. For a deeper look at how we handle automation faults, see Electric Gate Repair in Sunrise.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sunrise
Gate installation in Sunrise is rarely as simple as setting two posts and hanging a gate leaf. In communities built in the 1980s and 1990s, original gate frames are often corroded to the point where repairs stop making financial sense. The climate here doesn’t just wear out operators; it attacks the metal itself, and a new gate with the old automation is frequently the wrong way to spend money. We install complete systems, mechanical structure and electronics together, sized for how the gate actually gets used in Sunrise: high cycle counts, daily delivery traffic, and code compliance. You can see the full service at Gate Installation.
Automatic Gate Installation
Signs you need it
You’re replacing an operator for the second time in five years, or the gate is so corroded that patching it costs more than a new one.
What it costs in Sunrise
Automatic gate installation in Sunrise typically runs $3,000 to $12,000 depending on gate size, operator type, and the condition of the existing posts and conduit.
How we do it
We inspect the posts and pad, remove the old gate and operator, install the new gate leaf, mount and wire the operator, then set and test the travel limits, obstructions, and keypad.
Electric Gate Installation
Signs you need it
You’ve bought or inherited a property with a manual gate and want controlled access, or the old gate automation is beyond repair.
What it costs in Sunrise
Electric gate installation in Sunrise generally runs $2,500 to $9,000 whether you’re automating an existing solid gate or installing a complete new electric system.
How we do it
We verify the gate’s weight and swing or slide path, mount the operator, run the low-voltage wiring to the control box and keypad, install safety photo-eyes, and program remotes and code entry.
What Gate Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Basic single swing gate with operator | $3,000 to $6,500 |
| Single slide gate, fully automated | $4,000 to $8,500 |
| Dual-gate system with operator, keypad, and intercom | $6,500 to $12,000 |
Sunrise’s older neighborhoods can push prices to the higher end when posts need core-drilling, conduits need replacing, or an HOA requires a specific operator brand. Whatever the quote, we agree on it in writing before any work starts.
How long does gate installation take in Sunrise?
Most single-gate installations in Sunrise take one to two working days, including wiring and programming. HOA community gates with vehicular loops and telephone entry may take three to five days, and we coordinate the schedule with your board or property manager.
Do you handle HOA gate installation requirements in Sunrise?
Yes. We work with Sunrise HOAs regularly, produce the documentation boards require before and after installation, and schedule work around community traffic patterns. We’ll tell you exactly what your association needs from us before the first post goes in.
Brands We Service in Sunrise
We work on LiftMaster, FAAC, BFT, and Linear gates across Sunrise, and we carry common control boards, remotes, photo-eyes, and loop detectors for these brands in our service vehicles. That means many Sunrise repairs are same-visit fixes rather than a diagnosis followed by a parts order. See our brands for the full range we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate opener repair | $250 to $550 |
| Keypad and intercom repair | $180 to $350 |
| Track and roller replacement | $350 to $800 |
| Electric and circuit board repair | $300 to $750 |
| Automatic gate installation | $3,000 to $12,000 |
| Electric gate installation | $2,500 to $9,000 |
| Driveway gate installation | $4,500 to $10,000 |
| Sliding gate installation | $4,000 to $8,500 |
In Sunrise, prices rise when corrosion has spread to the posts or conduit, when an HOA requires a specific brand, or when storm damage means replacing several components at once. Every job is quoted and agreed before work begins, so you won’t find a larger number on the invoice than the number we discussed.
Neighborhoods We Serve in Sunrise
We cover all of Sunrise, including the gated 55+ communities and HOA subdivisions where gate traffic is heaviest. Our techs are familiar with the gate brands and board requirements across these neighborhoods.
- Sunrise Golf Village
- Sunrise Lakes
- Welleby
- Springtree
- New Orleans Homes
Most repair calls in Sunrise get a same-day or next-day visit, and we schedule HOA work around the community’s traffic patterns.
Service Area – Cities Near Sunrise
Along with Sunrise, our service area covers nearby Broward communities. If you’re in Wilton Manors, FL, Boulevard Gardens, FL, Rock Island, FL, or Roosevelt Gardens, FL, we can handle the same gate work in your neighborhood.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most residential repairs in Sunrise are scheduled same-day or next-day. We also take emergency calls for gates stuck open or closed, which matter more in Sunrise given how many homes and communities rely on the gate for controlled access.
Some Sunrise communities require board approval or a specific vendor before gate work starts, especially on shared entry gates. We work with many Sunrise HOAs and can provide the documentation your association asks for, but we recommend confirming your community’s rules when you book the appointment.
Yes. For community gates, we plan work around your busiest entry and exit windows, which in Sunrise tend to be morning mail delivery and school pickup. We’ll coordinate the exact window with you or your property manager before the visit.
If your gate is down, sagging, or just won’t respond in Sunrise, call (855) 382-0732. We’ll quote the repair before we start, and we’ll tell you straight whether it’s a fix or a replacement.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rafael Garcia"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Brooke Parker