Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in West Palm Beach, FL
Gate installation in West Palm Beach means building for salt air, hurricane season, and homes that range from 1920s Mediterranean-revival estates in El Cid to canal-front properties on the Intracoastal. We install automatic gates, driveway gates, sliding gates, and electric gate systems that stand up to this specific environment. Miami Gardens Gate Repair has served West Palm Beach since 2012, and gates are all we do. From wind-rated hardware to corrosion-resistant components, we build it right the first time. Call (855) 382-0732 for a free estimate on any gate installation in West Palm Beach.
Why West Palm Beach Homes Are Different
West Palm Beach sits on one of the most hurricane-exposed stretches of the U.S. coastline, and its housing stock tells that story. Historic districts like El Cid, Flamingo Park, and Grandview Heights still hold original 1920s wrought-iron and masonry gates, many of them beautiful but decades past their structural prime. Those gates need fabrication and retrofit work that respects the original profile while bringing the hardware up to current code. West of I-95 in the 33411 and 33412 ZIPs, 1990s and 2000s gated communities run builder-grade aluminum and steel driveway gates that fail in predictable ways: worn rollers, tired operators, and hinges that bind in the humidity.
Then there’s the salt. Any gate within a few miles of the Intracoastal or Atlantic takes a constant salt-laden onshore breeze. Steel rusts. Aluminum pits. Hinges seize. Control boards corrode from the inside. Canal-front and intracoastal properties often have dock-access or boat-yard gates that never dry out. Summer afternoon thunderstorms dump rain, and the June through November hurricane season pushes wind-load rating, operator battery backup, and impact-rated hardware to the top of every decision. Add post-2002 Florida Building Code impact standards for anything replaced after Hurricane Andrew, and a gate job in West Palm Beach is not the same as a gate job inland. We know that because we work in it every week.
Styles & brands we work with
Our Main West Palm Beach Services
Most West Palm Beach calls to us start with one of two problems: a gate that won’t move, or an electric system that stopped responding. Here’s how each breaks down.
Gate Repair in West Palm Beach
Mechanical gate repair in West Palm Beach almost always involves corrosion or wind damage. Salt air seizes hinges, rusts steel frames, and wears out rollers on sliding gates. We repair bent tracks, replace rusted hinges, reweld cracked joints, and straighten gates that a storm pushed out of alignment. In the historic districts, we match original ironwork profiles rather than slapping on a generic replacement. In the western gated subdivisions, we source the builder’s original gate profile when an HOA requires it. Gate Repair in West Palm Beach covers everything from a sticky latch to a full gate reset.
Electric Gate Repair in West Palm Beach
Electric gate problems in West Palm Beach tend to cluster around humidity and salt intrusion. A control board that worked in March may fail in August after three months of afternoon thunderstorms. Photo-eye brackets corrode solid. Loop detectors stop sensing. Motors run slow, or not at all. We diagnose the entire system, not just the symptom. That means testing the operator, the control board, the power supply, and the access system together, because a gate that won’t close is rarely one isolated fault. Electric Gate Repair in West Palm Beach is where we trace the problem to its source.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in West Palm Beach
Gate installation in West Palm Beach has to solve for two things at once: the Florida Building Code wind-load requirements that kicked in after Hurricane Andrew, and the salt-air exposure that eats unprotected hardware within a few years. Whether you’re replacing a rusted-out canal-front gate in the 33404 corridor or putting a new automatic driveway gate on a home in 33411, the materials and operator choice change based on proximity to the Intracoastal and exposure to open wind. We build gate systems that hold up here, and we install them from the first post hole to the final access-code test. For a detailed look at what a full installation involves, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand, the motor is loud or jerky, or you’ve had repeated failures with an operator that predates current battery-backup standards.
What it costs in West Palm Beach
Automatic gate installation in West Palm Beach typically runs $3,500 to $7,500 for a single residential swing gate with operator, and $5,000 to $12,000 for a dual swing or heavier sliding system.
How we do it
We set the posts, hang the gate, mount the operator with the right torque for the gate’s weight and wind exposure, wire the control board and safety edges, and program remotes and keypads before testing full cycles.
Driveway Gate Installation
Signs you need it
You have no gate at the driveway entrance, your current gate doesn’t match the scale or style of the home, or a storm bent the frame past practical repair.
What it costs in West Palm Beach
A standard driveway gate installation in West Palm Beach runs $3,500 to $7,500 for a single gate, with customized steel or aluminum work pushing into the $8,000 to $15,000 range depending on width and wind rating.
How we do it
We measure the driveway opening, fabricate or source the gate to the required wind-load rating, set posts in concrete, hang and level the gate, and attach the operator if the system is automated.
What Gate Installation Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Single automatic swing gate with operator | $3,500 – $7,500 |
| Dual swing or sliding gate system | $5,000 – $12,000 |
| Custom steel or aluminum driveway gate | $8,000 – $15,000 |
Do I need a permit for a new gate in West Palm Beach?
Most new automatic gate installations in West Palm Beach require a permit, especially when the gate crosses a public right-of-way or adds an operator with electrical work. We handle the permit paperwork as part of the installation so the job passes inspection the first time. Call (855) 382-0732 to confirm what your specific site in West Palm Beach requires.
How long does gate installation take in West Palm Beach?
Most residential gate installations in West Palm Beach take one to two days on site, not counting permit approval time or HOA review in gated communities. Custom fabrication and concrete curing can stretch the schedule, but we give you a written timeline before any work starts.
Brands We Service in West Palm Beach
We work on and install operators from BFT, Linear, Viking, Ghost Controls, LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Because we carry parts knowledge across all nine brands, we don’t need to push a full-unit replacement when a single board or limit switch is the actual fix. Check our brands page for the full list of what we service and install.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in West Palm Beach, FL
| Service | Typical range in West Palm Beach |
|---|---|
| Standard service call with diagnosis | $79 – $129 |
| Hinge replacement | $150 – $350 per hinge |
| Roller replacement | $100 – $250 |
| Chain or belt replacement | $150 – $400 |
| Track realignment | $150 – $350 |
| Keypad or key switch replacement | $150 – $400 |
| Safety sensor or photo-eye replacement | $150 – $350 |
| Gate opener replacement | $800 – $2,500 installed |
| Control board replacement | $250 – $800 |
| Full gate system replacement | $3,000 – $8,000 |
| Automatic gate installation | $3,500 – $7,500 |
| Driveway gate installation | $3,500 – $15,000 |
Salt-air corrosion and wind-load code compliance are the two biggest price movers in West Palm Beach. A gate within sight of the Intracoastal usually needs upgraded hardware and corrosion-resistant finishes, and anything in a hurricane-exposed opening has to meet post-2002 impact standards. We quote the full price before any work begins, and that price does not change once we start.
Neighborhoods We Serve in West Palm Beach
Our gate crews cover all of West Palm Beach and the surrounding communities, from the historic streets of El Cid to the gated subdivisions west of I-95. We schedule by area so a technician is usually on site the same day for repairs or within one to two days for installation estimates, depending on where the property sits and how many stops are already booked that morning.
- El Cid
- Flamingo Park
- Grandview Heights
- Northwood Hills
- Riverwalk
Service Area – Cities Near West Palm Beach
We also serve the communities around West Palm Beach, including West Gate, FL just to the south, Haverhill, FL west of the city, Lake Belvedere Estates, FL in the 33415 corridor, and Plantation Mobile Home Park, FL in the 33417 area. If your gate sits anywhere in the West Palm Beach metro, we can get to it.
Serving West Palm Beach, FL — Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in West Palm Beach
For mechanical and electric gate repairs in West Palm Beach, we aim for same-day service across most ZIPs we cover, including 33416, 33417, 33419, and 33420. Canal-front and intracoastal properties may need a next-morning visit if the call comes in late. Call (855) 382-0732 and we’ll confirm a window.
Many West Palm Beach gated communities, especially the 1990s and 2000s subdivisions west of I-95, require HOA approval before gate repair or replacement, and some mandate matching the original builder’s gate profile. We work with the HOA specs you provide and can source the correct profile rather than substituting a generic gate.
We cover the full West Palm Beach area, from the 1920s districts east of I-95 to the gated communities in 33411 and 33412, plus the canal-front properties along the Intracoastal. Our service area includes the surrounding cities listed above. If you’re inside the West Palm Beach metro, give us a call.
Home | Gate Repair in West Palm Beach | Electric Gate Repair in West Palm Beach
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Palm Beach Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Adriana Reyes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jennifer Bennett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rafael Garcia