Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Port Salerno, FL | Miami Gardens Gate Repair
If your Ghost Controls opener is dead, dragging, or tripping its own limit, we can usually get to it fast and fix it right the first time. We’re Miami Gardens Gate Repair, and we work on Ghost Controls equipment across Port Salerno regularly. The thing that makes our Ghost Controls work different here is simple: we’re not reading from a manual, and we know what the lagoon-side salt air does to these openers inside of two years. Call us at (855) 382-0732 for a free estimate.
Port Salerno sits tight against the Indian River Lagoon. That’s a beautiful spot to live, but it’s rough on gate hardware in ways a generic Ghost Controls page never mentions. We’re an independent gate repair company, not affiliated with Ghost Controls, and we fix the corrosion, the fried boards, and the storm-bracing problems that show up on canal-front and older Port Salerno properties. This is what we do: Ghost Controls sales & service, repair-first, with parts that actually hold up here.
Why Port Salerno Residents Choose Us for Ghost Controls Service
We know Ghost Controls service in North River Shores operators because we work on them constantly: the Stealth series, the ARES line, the tube-gate rear-mount kits, and the solar retrofit packages on older manual swing gates. We’re also factory-familiar with the other major brands out there – LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, Mighty Mule – and that side-by-side knowledge helps us diagnose a Ghost Controls board failure faster than a shop that only sees one brand a month.
Noel Carballo, our owner and lead gate technician, studied electrical and mechanical systems at Miami Dade College’s North Campus, and he grew up around gates that stuck, groaned, or flat-out refused to open. That background means our crew doesn’t guess. We trace the problem to the actual component, whether it’s a corroded terminal block, a seized hinge, or a charge controller that’s been starved by salt film on the solar panel. If your gate’s giving you trouble, it’s telling you something. Let’s figure out what.
We cover all of Port Salerno, including the 34992 ZIP code, and we keep Ghost Controls repair in Sewall’s Point OEM boards, harnesses, and solar charge parts accessible for fast turnaround. For hinges, arms, and hardware, we use marine-grade stainless where it matters, because standard zinc-coated steel simply doesn’t last on a lagoon-side property.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Port Salerno
These are the failure modes we see week after week in Port Salerno, and they’re rarely just “the motor went bad.”
- Salt-crusted terminal blocks and corroded battery leads. The Indian River Lagoon puts salt spray into the air, and that spray finds its way into Ghost Controls control boxes within a couple of years. The low-voltage connections corrode long before the motor itself gives out. We clean and re-terminate with marine-grade hardware, and in most cases the board and battery are still fine.
- Seized hinges and rust-frozen arms on canal-front gates. A gate that drags against a rusted hinge trips the obstruction limit and stalls mid-travel. We’ve fixed this exact problem on Ghost Controls Stealth openers along the lagoon-side streets. The fix is mechanical, not electronic: free the hinge, weld a new plate if the old one’s gone, re-aim the arm, and the operator cycles clean again.
- Heaving posts after summer downpours. Port Salerno’s high water table and sandy fill means gate posts shift. When a post leans even a little, the Ghost Controls arm geometry goes off and the gate binds. We re-set the post, adjust the arm, and often add bracing so the next wet season doesn’t undo the work.
- Solar panel and charge-controller underperformance. Months of cloud cover plus salt film on the panel glass leaves the battery too weak to cycle the gate. We test the panel output, clean or re-aim it, and replace the charge controller when it’s no longer holding voltage. Battery backup is a big part of what keeps these gates running through storm season.
- Failed control boards from power surges. Florida lightning and grid flicker kills electronics. We keep Ghost Controls OEM boards available for fast replacement, and we’ll tell you straight if a board swap is the right call versus a full operator replacement. In most Port Salerno cases, the board is the only fault.
Ghost Controls Service in Port Salerno: What Local Conditions Mean for Your Equipment
Here’s what a generic Ghost Controls page won’t tell you: on the canal-front and lagoon-side streets of Port Salerno, salt spray reaches gate control boxes and hinges within a couple of years, and many properties need removable or storm-rated gate setups ahead of hurricane season. So a Ghost Controls call here is usually a corrosion-and-storm-bracing job, not just a dead-motor swap. We see it constantly on streets off SE Dixie Highway and along the older canal-front lots. The control box develops white crust on the terminals. The hinge plates rust through. The gate drags, the obstruction limit trips, and the owner thinks the opener is shot. Half the time the board and motor test fine once we clean the connections and free the hardware.
On a canal-front lot off SE Dixie Highway in Port Salerno, our crew answered a Ghost Controls Stealth swing opener that had stopped reversing. The board was fine, but the salt-crusted battery terminals and a rust-seized hinge had the gate dragging against its limit. We cleaned and re-terminated the low-voltage connections with marine-grade hardware, welded a new hinge plate, re-aimed the arm, and left the gate cycling clean on backup power before the next storm warning. That’s the kind of fix that keeps Port Salerno’s Ghost Controls gates running when the next hurricane push comes through.
We also work with properties that need their gate removable or braced before a storm. If you have a Ghost Controls opener on a gate you pull down for evacuation access, we can set up quick-release hardware and check the battery backup so the gate still cycles when the power’s out.
Ghost Controls Models & Products We Service in Port Salerno
We repair and install Ghost Controls equipment across the full line. That includes the Stealth series heavy-duty solar and AC swing openers, the ARES series swing operators, and the Tube-Gate rear-mount kits for tube and ornamental gates. We also work on the solar-charged DIY retrofit kits that went onto older manual swing gates all over Port Salerno’s mid-century housing stock.
Our parts approach is straightforward: we use Ghost Controls OEM boards, harnesses, and solar charge components where fit and reliability matter. For arms, hinges, and mounting hardware, we use quality aftermarket or marine-grade stainless where OEM offers no real advantage. If a control board or battery is the only fault, we repair it. We only recommend a full operator replacement when the housing, gearing, or charge system is genuinely past saving. Repair it right, or replace it right – we’ll tell you which one you actually need.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Port Salerno
Here’s what Ghost Controls gate repair typically costs in Port Salerno, based on what we see across the 34992 area:
- Diagnostic service call: $75 – $150, depending on where you are in Port Salerno and how far off the main roads the property sits.
- Corroded terminal and connection cleanup: $90 – $180, including marine-grade re-termination on most single-operator boxes.
- Ghost Controls control board replacement: $250 – $450 installed, depending on the Stealth or ARES board your unit takes.
- Hinge plate weld and re-alignment: $180 – $350, including re-aiming the operator arm after the repair.
- Swing gate repair and arm adjustment: $200 – $400, covering seized hinge free-up, post realignment, and limit reset.
- Full operator replacement (parts and labor): $800 – $1,800, depending on the Ghost Controls model and whether we’re reusing the existing post and arm.
- Solar charge system repair: $150 – $350, covering panel testing, cleaning, re-aiming, and charge controller replacement when needed.
The price is quoted and agreed before any work starts. You’ll know the number before we touch a wrench. Call us at (855) 382-0732 for an exact quote on your Ghost Controls gate – estimates are free.
Serving Port Salerno, FL — Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Port Salerno
In almost every canal-front case we see, the limit is tripping because the gate itself is dragging, not because the opener is weak. Salt air rusts the hinges, the arm binds, and the Ghost Controls board reads the extra resistance as an obstruction and stops. We free or replace the hinge, re-aim the arm, reset the limits, and the opener stops tripping. Call (855) 382-0732 and we’ll diagnose it on-site.
Yes, but only if the panel and charge system are in good shape. Salt film on the panel glass and months of cloud cover starve the battery. We test panel output, clean it, and replace the charge controller when it’s not holding voltage. Battery backup is what carries these gates through power outages. Call (855) 382-0732 for a free estimate on a solar checkup before the next storm push.
Usually not. The white crust is salt corrosion on the low-voltage terminals and battery leads, and the board itself often survives. We clean and re-terminate the connections with marine-grade hardware, test the board, and replace only what’s actually failed. In most Port Salerno cases, the motor and board are still good. Call (855) 382-0732 and we’ll tell you straight what’s salvageable.
Yes, all the time. A big share of Port Salerno’s housing stock is mid-century and older, and many of those properties had Ghost Controls solar retrofit kits bolted onto the original manual swing gates. The weak point is usually the old hinges and posts, not the Ghost Controls kit. We re-hang the gate, brace the post, and get the operator cycling clean again. Call (855) 382-0732 for an exact quote.
Yes. That means checking the battery backup, testing the solar charge system, freeing any corroded hinges, and adding removable or quick-release hardware if the gate needs to come down for evacuation access. We’ve done this for properties throughout Port Salerno, especially the canal-front and lagoon-side lots. Call (855) 382-0732 and we’ll put you on the schedule before the next storm warning.
Service Areas Near Port Salerno
Port Salerno is our home base for Martin County gate work, and we regularly serve the surrounding communities. If you’re in Ghost Controls service in Palm City, we can usually be there quickly. We cover Ghost Controls service in Stuart, too. And for the full picture of where we work, see our Port Salerno service area page.
Book Your Ghost Controls Service in Port Salerno Today
Your Ghost Controls gate is the first line of security and convenience at your Port Salerno property. When it’s down, it’s urgent. Call (855) 382-0732 now for a free estimate and a straight answer on what’s wrong and what it’ll take to fix it. We’ll quote the price before we start, and we’ll have your gate cycling clean before the next storm.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Port Salerno and the surrounding Martin County area.