Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fort Lauderdale
Electric gate repair in Fort Lauderdale typically runs $180 to $1,400 depending on the fault, with control board replacements at the upper end and sensor realignments at the lower. We dispatch technicians who work on gates exclusively, covering everything from Las Olas canal-front estates to 1950s ranch homes off Federal Highway. If your gate is stuck, grinding, or ignoring the remote, call (855) 382-0732 and we’ll get a technician to your Fort Lauderdale property fast.
Fort Lauderdale gates fail differently than gates anywhere else in Broward. Salt air, hurricane wind codes, and tight lots all shape how we diagnose and repair. Noel Carballo built our team around that reality.
Why Miami Gardens Gate Repair Is Fort Lauderdale’s Preferred Electric Gate Repair Company
We’re a gate-only shop. Not a garage door company that also does gates, not a general contractor who takes gate calls on slow days. Every technician at Miami Gardens Gate Repair works on gates every single day, and on the electronics that drive them. When a LiftMaster operator in Victoria Park won’t respond to the keypad, or a BFT actuator on a canal-side slide gate is running slow, our Electric Gate Repair team knows the system before they arrive.
Fort Lauderdale property managers and homeowners call us because they’ve already had someone out who couldn’t fix it. Maybe it was a handyman who changed the battery and left. Maybe it was a garage door tech who didn’t recognize a FAAC control board. We get the call after those. Our brand fluency across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule means we diagnose what’s actually failing, not just what’s easiest to swap.
Response time matters when your only vehicle access is blocked. We prioritize Fort Lauderdale calls because a stuck gate on a shared driveway or a condo entrance backs up everyone. Estimates are free, and the price is quoted and agreed before any work starts.
Styles & brands we work with
Gate Opener Repair in Fort Lauderdale
Gate Opener Repair in Fort Lauderdale usually means one of three things: a motor that’s seized or burnt out, a control board that’s been fried by a power surge or moisture, or a limit switch that’s lost calibration. We open the operator housing, test the board, check the capacitor, and determine whether you need a component repair or a full operator replacement. A typical gate opener repair in Fort Lauderdale runs $220 to $550 for component-level work; a full operator replacement with labor starts around $700 and climbs based on the brand and gate weight.
Motor and Capacitor Diagnostics
Humming but not moving? That’s usually the capacitor or the motor itself. We test both under load before recommending anything. In Fort Lauderdale’s humidity, capacitor failure is common, and it’s a $40 part versus a $400 motor, so we check it first – that’s the kind of repair that separates a specialist from a parts swapper.
Slide Gate Opener Replacement
On those narrow canal-front lots, the slide gate operator takes a beating from salt spray. We replace rusted coastal-grade hardware, realign the track, and install the new operator with stainless fasteners when needed. The price is quoted and agreed before we start, and we schedule the work when it fits your property’s vehicle and pedestrian access needs.
Automatic Gate Repair in Fort Lauderdale
Automatic Gate Repair in Fort Lauderdale covers the whole system: the operator, the safety sensors, the keypad, the receiver, the loop detector. A gate that opens but won’t close usually points to a photocell misaligned by salt fog or debris. A gate that closes on cars is often a loop detector that’s taken on water from heavy summer rains. In shared driveways, that loop detector failure is more than annoying – it’s dangerous. Entrapment protection matters.
Safety Sensor and Loop Detector Work
Fort Lauderdale’s rainy season floods loop detector housings and corrodes the wire connections. We diagnose water intrusion, replace the detector or rewire the loop, and seal the housing properly. Cost for loop detector replacement in Fort Lauderdale typically lands between $300 and $500 including the part and labor. UL 325 compliant entrapment protection is non-negotiable on any automatic gate we touch.
Control Board and Access System Repair
When the keypad won’t accept codes or the remote stopped working, the control board is usually the culprit. We test the board, check the power supply, and verify the radio receiver. Control board replacement in Fort Lauderdale generally runs $400 to $800 depending on the brand and board version. We stock boards and receivers for the major brands so you’re not waiting on a part to ship in.
Trusted Brands We Service in Fort Lauderdale
We’re factory-familiar with nine major gate brands, and we lean on that daily in Fort Lauderdale: LiftMaster operators on residential swing gates in Plantation, FAAC actuators on condo entrances near the beach, BFT slide gate motors on canal-side properties. We stock common parts locally for LiftMaster, FAAC, BFT, and Linear, which means faster turnaround and fewer second trips. If you own a Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system, we work on those too. No brand is alien to us.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Fort Lauderdale Homes
- Loop detector failure in shared driveways. Heavy summer rains fill the detector housing, and the gate starts closing on vehicles. We replace the detector and seal the housing against water intrusion; this fixes the dangerous false-closing behavior for good.
- Safety photocell misalignment from salt fog and debris. Beachside properties along A1A and the canals accumulate salt film on sensor lenses, causing intermittent stops and failures to reverse. We clean, align, and shield sensors so they hold calibration in coastal air.
- Hinge post corrosion in beachside and canal-side gates. The footing and hinge hardware rust out long before the gate panel shows wear. We replace the corroded hinge and realign the post – sometimes that requires a new footing, not just a hinge swap.
- Rack and pinion wear on slide gates. Fort Lauderdale’s salt air attacks the exposed rack and pinion on slide gates aggressively. We replace rusted coastal-grade rack sections, lubricate the pinion, and adjust the V-track so the gate moves cleanly instead of grinding.
Pricing for Electric Gate Repair in Fort Lauderdale, FL
Here are the numbers, straight. Sensor realignment or a bad capacitor: $180 to $300. Gate opener motor replacement: $400 to $700. Control board replacement: $400 to $800. Loop detector replacement: $300 to $500. Full operator replacement including labor: $700 to $1,400. Slide gate rack and pinion repair: $350 to $600. These are Fort Lauderdale market prices – coastal-grade hardware and stainless fasteners run higher here than inland Broward, and we quote accordingly. Every job is quoted and agreed before we start. No invoice surprises. Call (855) 382-0732 for a free estimate.
We Also Serve Cities Near Fort Lauderdale
Our Fort Lauderdale service area extends to Plantation, Broadview Park, Broward Estates, and Lauderhill. If your property sits just outside the city line, call us anyway – we regularly run calls across these borders and price them the same as in-city work.
Serving Fort Lauderdale, FL — Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fort Lauderdale
Salt air and year-round humidity accelerate corrosion on steel hardware, hinges, chains, and electrical connections. On canal-front and beachside properties, we see hinge post corrosion and operator chain failure long before the gate panel itself shows wear. Coastal-grade hardware and stainless fasteners are standard practice for us in Fort Lauderdale, and we recommend them on every repair. If your gate is grinding or showing rust at the hardware points, call (855) 382-0732 for an inspection.
Yes, and we do it regularly. Fort Lauderdale’s narrow canal-front lots and shared driveways often force slide gates because there’s no room for a swing gate to clear. The same salt air that corrodes the hardware also attacks the exposed rack and pinion on these slide gates more aggressively than inland swing gates. We replace rusted rack sections, realign the V-track, and install operators with stainless fasteners. Call (855) 382-0732 to schedule a free estimate for your slide gate.
We assess your gate’s configuration before we start. On slide gates, we can often keep manual access open during the repair. On swing gates, we work in stages so one leaf remains operable where possible. For shared driveways and HOA entrances, we coordinate with you on timing and access. The goal is to fix the gate without blockading your vehicle or pedestrian flow for longer than necessary.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for LiftMaster, FAAC, BFT, and Linear locally, which shortens repair time for the brands we see most in Fort Lauderdale. If you have a different brand, call (855) 382-0732 and we’ll tell you honestly whether we can source the part same-week.
Yes. UL 325 requires entrapment protection – photocells, safety edges, or inherent reversing mechanisms – on any automatic gate operator. Fort Lauderdale’s salt fog and debris can misalign photocells or degrade safety edges, leaving a gate that doesn’t reverse when it should. We test every safety device on every automatic gate repair and bring non-compliant systems up to standard. If your gate has ever closed on a person or a car, call (855) 382-0732 immediately – that’s an urgent repair, not a tune-up.
On a canal-front property off Las Olas, we found a LiftMaster slide gate operator seizing from corrosion on the rack and pinion. The homeowner had already replaced the gate panel once. We replaced the rusted coastal-grade hardware, realigned the track, and installed a new operator with stainless fasteners, restoring reliable keypad entry for the shared driveway. That’s the Fort Lauderdale repair pattern we solve every week: rust and tight lots on top of ordinary operator failures.
We’re Miami Gardens Gate Repair, and gates are all we do. From a bent hinge in Broward Estates to a failed control board in Plantation, one call covers the diagnosis, the fix, and the hardware. Call (855) 382-0732 for a free estimate on electric gate repair in Fort Lauderdale. We quote the price before any work begins.
Written by Noel Carballo, Owner at Miami Gardens Gate Repair, serving Fort Lauderdale and surrounding Broward County.