Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fort Lauderdale, FL
Gate installation in Fort Lauderdale is shaped by two forces: a housing stock split between 1950s-70s homes west of Federal Highway and newer waterfront estates along the Intracoastal, and a subtropical marine climate that punishes undersized hardware. We install swing, sliding, and electric gates sized for long Florida driveways, with anchoring and operator mounting built for hurricane wind loads. Whether it’s a new Mighty Mule on a Las Olas townhome or a full sliding gate for a canal-front property in 33301, call (855) 382-0732 for a free measure and written price.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale gate work is dominated by salt-air corrosion and hurricane-code metal. Canal-front and beachside properties from Las Olas to Lauderdale-by-the-Sea have driveway and seawall gates whose steel hardware, hinges, and operators pit and seize in the salt-laden ocean air. Repairs here are as much about replacing rusted coastal-grade hardware and prepping for corrosive onshore winds as fixing the gate itself.
The housing stock compounds it. In the 1950s-70s single-family neighborhoods west of Federal Highway, you still find original steel gates mounted on posts that have settled in sandy soil. Along the Intracoastal and canals, waterfront estates run long driveways with heavy gates that get cycled constantly by residents, landscapers, and deliveries. Near the beach in 33302 and 33340, mid-rise condos and HOAs depend on electric entrance gates that see hundreds of cycles a day in humid, salty air.
Then there’s the building code. Post-Andrew construction standards in Broward require heavier anchoring and wind-rated gate hardware than inland communities deal with. A gate that meets code in Weston may not survive the next named storm three blocks off A1A. We measure, anchor, and prep every Fort Lauderdale gate like it will face a hurricane, because sooner or later, it will.
Styles & brands we work with
Our Main Fort Lauderdale Services
Most calls we get in Fort Lauderdale fall into two buckets: a gate that won’t move or stay aligned, and an electric system that has stopped responding. Here’s how those break down.
Gate Repair in Fort Lauderdale
Salt air eats hinges, chains, and steel posts faster than inland counties see it. A gate that drags on its track in Victoria Park or sags at the hinge on a canal-side driveway usually has corroded hardware underneath. We replace hinges with coastal-grade steel, re-square posts that have settled in sandy Fort Lauderdale soil, and re-weld or re-anchor where wind load has stressed the frame. Same-day service is available for emergency repairs in most of the city. Gate Repair in Fort Lauderdale covers the full scope.
Electric Gate Repair in Fort Lauderdale
Humidity and salt air are hard on control boards and limit switches. A LiftMaster that won’t close or a FAAC that runs slow in the morning after a humid night is often a board corrosion issue or a sensor short. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing, so most Fort Lauderdale electric gate repairs don’t wait on shipping. Condo and HOA entrance gates near the beach are a daily part of this work. Electric Gate Repair in Fort Lauderdale lays out the full diagnostic path.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fort Lauderdale
Gate installation in Fort Lauderdale means working with sand-based soil that shifts, salt air that rusts, and wind codes that demand heavier anchoring than inland Broward. We install automatic and manual gates sized for the property, set posts deep enough to hold through a tropical storm, and mount operators with the electronics protected from humidity. If you’re replacing a corroded gate or adding one to a new driveway, we handle the entire job from measure to final walkthrough. For a deeper look at what a full install involves, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You want keypad, remote, or intercom access without getting out of the car every time.
What it costs in Fort Lauderdale
Automatic gate installation in Fort Lauderdale typically ranges from $2,100 to $5,200 depending on gate size and operator duty cycle.
How we do it
We set the gate and posts, mount the operator, run the power feed, wire the control board, install safety edges and loop detectors, and program your remotes and keypad.
Electric Gate Installation
Signs you need it
You have a manual gate you’d rather not open by hand, or a pedestrian and vehicle gate that should work from one access system.
What it costs in Fort Lauderdale
Electric gate installation in Fort Lauderdale typically runs $2,800 to $5,600 including the operator, wiring, and safety loops.
How we do it
We mount the appropriate operator for your gate weight and duty cycle, run conduit and low-voltage wiring, install safety edges and loop detectors, and tie it into your existing intercom or keypad.
Driveway Gate Installation
Signs you need it
Your driveway is open to the street and you want a physical barrier that fits a long Florida drive.
What it costs in Fort Lauderdale
Driveway gate installation in Fort Lauderdale typically lands between $2,500 and $5,800 depending on gate material, width, and whether it’s automatic.
How we do it
We measure the opening, spec the gate for wind load, set posts below the soil’s active layer, hang the gate, and add hardware rated for coastal exposure.
Sliding Gate Installation
Signs you need it
Your driveway has little room for a swing arc, or the opening is wide enough that a sliding gate fits better than a swing leaf.
What it costs in Fort Lauderdale
Sliding gate installation in Fort Lauderdale generally costs $3,000 to $6,500, with cantilever slides running higher where no ground track is wanted.
How we do it
We set the track or cantilever posts, balance the gate on its rollers, install the operator and rack, then wire and test the full travel with the safety loops.
What Gate Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Manual driveway gate, basic | $1,200 – $2,800 |
| Automatic gate with operator | $2,100 – $5,200 |
| Sliding gate with operator and safety loops | $3,000 – $6,500 |
Can you install a gate that survives Fort Lauderdale salt air?
Yes. We specify aluminum frames, stainless or hot-dip galvanized hinges, and sealed operator enclosures for coastal installs. The gate still needs maintenance, but it starts with materials that don’t pit after two wet seasons.
Call (855) 382-0732 to talk through materials and get a written quote.
Do you handle the power run and safety edges on electric gates?
Yes, the full electrical side is part of the install. We run conduit, wire the control board, install safety edges and loop detectors, and program remotes, keypads, and intercom tie-ins. Call (855) 382-0732 for an exact scope and price.
Brands We Service in Fort Lauderdale
We work on Elite, Mighty Mule, LiftMaster, and FAAC, among other major gate operators. We keep common Fort Lauderdale failure parts stocked locally: control boards, limit switches, safety edges, remote receivers, and capacitors. That means most calls don’t wait on a shipped part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Gate realignment and hinge replacement | $180 – $450 |
| Bent or rusted post replacement | $400 – $850 |
| Manual gate installation, basic | $1,200 – $2,800 |
| Automatic gate installation with operator | $2,100 – $5,200 |
| Electric gate installation, full system | $2,800 – $5,600 |
| Sliding gate installation with operator | $3,000 – $6,500 |
| Operator replacement for an existing gate | $850 – $2,000 |
| Control board diagnosis and replacement | $220 – $620 |
| Limit switch or safety edge repair | $120 – $320 |
| Coastal-grade hinge and hardware replacement | $190 – $480 |
What pushes price up in Fort Lauderdale is almost always salt-air damage: a corroded post that must be dug out and reset, an operator enclosure that has to be sealed against humidity, or wind-load anchoring that an inland code wouldn’t require. Every price is quoted and agreed before any work starts. No surprises on the invoice.
Neighborhoods We Serve in Fort Lauderdale
We run calls across the city, from 1950s ranch neighborhoods west of Federal Highway to canal-front estates and beachside condos. Response time across the Fort Lauderdale area is usually same day or next morning, depending on the neighborhood and the part.
- Las Olas and the downtown corridors
- Victoria Park and Colee Hammock
- Lauderdale-by-the-Sea coastline
- Canal-front communities off the Intracoastal
- Residential streets west of Federal Highway
Service Area – Cities Near Fort Lauderdale
We also cover the communities around Fort Lauderdale. Calls from Plantation, FL, Broadview Park, FL, Broward Estates, FL, and Lauderhill, FL get the same gate-only focus and brand familiarity.
Serving Fort Lauderdale, FL — Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Lauderdale
For emergency gate issues like a stuck-open gate or a failed operator on a security entrance, we typically reach most Fort Lauderdale neighborhoods same day. Routine installs and replacements are scheduled around a free measure and written quote. Call (855) 382-0732 to pin down a time.
Many Fort Lauderdale gate installs, especially automatic gates with electrical work and posts set near property lines, require a permit. Wind-load anchoring has to meet current Broward code. We recommend confirming with the city for your specific property, and measuring the job correctly before pulling anything.
Yes, and they’re a big share of our work near the beach and along the Intracoastal. We diagnose the operator, loop detectors, and access system together, and we stock parts for most major brands so an HOA entrance isn’t left hanging open. Call (855) 382-0732 to schedule a service visit.
For gate work in Fort Lauderdale, from a salt-corroded hinge to a full electric install, call (855) 382-0732 for a free estimate and upfront pricing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"Showed up when they said they would. That's most of the battle."
— Rosa Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Andres Salazar"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tara Sullivan