Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Plantation, FL
Gate installation in Plantation usually means one of two jobs: a heavy-duty automatic swing or slide gate on a large-lot property, or a replacement for aging hardware on a 1960s-80s home east of University Drive. We build for both, and we build for what South Florida does to gates, which is salt-laden moisture on the hinges, UV beating on the control boards, and sandy soil shifting posts after a storm. If your gate needs to be installed right the first time, call us at (855) 382-0732; we have worked on Plantation properties since 2012 and we know what this city’s lots, soil, and weather demand.
Why Plantation Homes Are Different
Plantation’s gate work splits into two distinct worlds. In Plantation Acres and the western ranch-style homes, you get generous lots, unpaved easements, and long driveways where a gate is not decorative flourish but the practical security perimeter of a private property. These are not cookie-cutter HOA gate calls off a paved loop; they are custom swing and slide operators doing real duty on sandy ground. The older sections off Broward Boulevard have their own character too, with equestrian properties and estate entrances that lean on heavy-duty operators, LiftMaster and FAAC units doing daily cycles in full sun.
East of University Drive, by contrast, homes from the 1960s through the 1980s more often have smaller decorative driveway gates and pool-enclosure gates that have been hanging on original hardware for decades. The hinges are rusted, the posts have drifted, and the operator, if there is one, was likely added years after the gate itself. Meanwhile the climate works against everything: humid subtropical air carries salt year-round, UV degrades plastic enclosures, and the June through November storm season bends arms and washes out operator pads. After a tropical storm, Plantation Acres calls spike because the sandy soil under the operator pad erodes and shifts the gate post, which is a failure mode you rarely see on the paved HOA gate loops closer to the coast. Knowing which Plantation you are working in changes the whole job.
Styles & brands we work with
Our Main Plantation Services
Most Plantation homeowners and property managers reach out to us for one of two reasons: the gate has stopped working mechanically, or the electric operator and access system have failed. Both are gate-only work, and both start with a real diagnosis on site.
Gate Repair in Plantation
Mechanical gate repair in Plantation covers bent steel, failed hinges, sagging leafs, and gates that bind against the post because the ground has moved underneath them. On large-lot western properties, we mostly see worn-out swing gate hinges and slide gate rollers running on tracks that have gone out of level in the sandy soil. On older homes east of University Drive, it is more often rusted original hardware and gates that drag because the post has leaned over the decades. One weather condition dictates much of what we do here: the combination of salt-laden moisture and intense UV means hinge pins and rollers wear faster in Plantation than they would inland. We assess the whole structure, straighten or replace the steel, reset the posts correctly, and get the leafs moving square again. Gate Repair in Plantation covers the full scope.
Electric Gate Repair in Plantation
When the operator is the problem, Plantation calls us about gates that will not retract, keypads that stopped responding after a storm, and control boards that clicked and died after a power surge. Electric gate repair here is partly electrical diagnosis and partly weather forensics: UV-baked enclosures, corroded terminal strips, loop detectors that have drifted out of tune, and motors that have burned out from years of daily cycling in heat. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can identify the failure on your specific operator without guessing. Electric Gate Repair in Plantation explains what the diagnosis covers and how we get your system moving again.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Plantation
New gate installation in Plantation replaces a broken or outdated system with a gate and operator sized for the actual lot, the actual soil, and the actual way you use the entrance. Whether we are building a custom swing gate for a Plantation Acres estate or a modest driveway gate on an older residential street, we start with what this climate does to a gate and engineer against it from the first post hole. That means corrosion-resistant hardware, proper drainage under the operator pad, and an operator matched to the gate’s weight and daily cycles, not an undersized unit that will burn out early. For a broader look at what the service includes, see Gate Installation.
Automatic Gate Installation
Signs you need it
You need automatic gate installation when you are ready to move from manual operation to keypad, remote, or intercom access, or when the existing automation is beyond repair and will cost more to patch than to replace properly.
What it costs in Plantation
Automatic gate installation in Plantation typically falls between $2,000 and $12,000, depending on gate size, operator type, and access system.
How we do it
We set and level the posts, hang and balance the gate, mount and wire the operator, then configure keypads, remotes, and safety loops before testing under load.
Driveway Gate Installation
Signs you need it
You need driveway gate installation when the old gate sags, drags, or has to be muscled open by hand, or when you want to add a gate to an entrance that has never had one.
What it costs in Plantation
Driveway gate installation in Plantation starts around $1,500 and typically runs between $2,000 and $6,000 for a single residential swing gate with basic automation.
How we do it
We measure the driveway opening, check the ground and slope, build the gate to fit, install hardware rated for the gate’s weight, and set the operator with safety edges or loops.
What Gate Installation Costs in Plantation
| Item | Typical range in Plantation |
|---|---|
| Driveway gate installation, single swing | $1,500 – $6,000 |
| Automatic gate installation, full system | $2,000 – $12,000 |
| Custom large-lot or estate gate installation | Varies by size; often $6,000 – $12,000+ |
How long does a gate installation take in Plantation?
Installation usually takes one to three days depending on gate size, concrete work, and operator configuration. We quote the schedule before we start, not after, so you know when the gate will be working.
Do I need a permit for a gate installation in Plantation?
Many Plantation gate installations need a permit, especially when electrical work is involved. We can tell you what applies to your property and we handle the paperwork as part of the job, so the installation itself is what you pay for and approve up front.
Brands We Service in Plantation
We service the operators Plantation actually has in the ground: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we work across all of them side by side, we can diagnose a FAAC running slow or a LiftMaster that will not close without needing to replace the unit to solve the problem. Common parts are stocked locally for the brands we see most in Plantation, which keeps turnaround short. Our brands page shows the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Plantation, FL
The table below gives real starting figures for gate work in Plantation. Every price is quoted and agreed before we begin, so the number on the table is your reference, not a surprise.
| Service | Typical range in Plantation |
|---|---|
| Gate repair, general service call | $95 – $150 |
| Gate repairs, actual work | $150 – $450 |
| Gate realignment | $175 – $350 |
| Broken hinge replacement | $100 – $250 per hinge |
| Keypad replacement | $150 – $400 |
| Loop detector replacement | $200 – $450 |
| Electric gate repair, full diagnosis and fix | $250 – $1,000 |
| Control board repair | $150 – $500 |
| Electric motor replacement | $400 – $1,800 |
| Driveway gate installation, single swing | $1,500 – $6,000 |
| Automatic gate installation, full system | $2,000 – $12,000 |
In Plantation specifically, prices push upward when posts sit in sandy or washed-out ground and need deeper concrete footings, and when older operators need full wire replacement after years of salt air. Whatever the scope, the price is set before the work starts, so the number on the quote is the number on the invoice.
Neighborhoods We Serve in Plantation
We cover all of Plantation, including the large-lot western section and the older residential streets east of University Drive. Response time in the area is typically same day for gate emergencies and within one to two days for scheduled installation and non-urgent repair, depending on parts.
- Plantation Acres
- Jacaranda
- Plantation Isles
- Country Club Estates
- East Plantation
Service Area – Cities Near Plantation
Miami Gardens Gate Repair works throughout Broward County, so if your property sits just outside Plantation’s 33388 ZIP code, we can still handle the gate. We regularly serve Fort Lauderdale, FL, Broadview Park, FL, Broward Estates, FL, and Lauderhill, FL. Call us at (855) 382-0732 and tell us where the gate is; we will tell you when we can be there.
Serving Plantation, FL — Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Plantation
For a gate stuck open, stuck closed, or refusing to operate after a storm, we dispatch to Plantation the same day in most cases. Because we are based nearby in Miami Gardens and work only on gates, our techs carry the parts for the common Plantation operator failures, which often means one visit, not a diagnosis trip plus a return trip.
Some Plantation communities have design standards for gate style, height, and materials, especially the planned neighborhoods and gated communities. We can work from your HOA spec, and we are used to matching existing gates so a new installation does not stand out from the surrounding homes. Bring us the requirements and we will design within them.
Yes, both, on the same visit when needed. The mechanical structure, the operator, the control board, and the access system are all gate work to us, so you do not need a separate contractor to chase down the other half of the problem. Call (855) 382-0732 for a free estimate and we will go over exactly what the gate needs.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plantation Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Gilbert Flores"Showed up when they said they would. That's most of the battle."
— Rosa Ramirez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Andres Salazar