Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Broadview Park, FL
Gate installation in Broadview Park usually means replacing an old aluminum slide gate or a sagging driveway swing gate that’s been fighting South Florida weather for twenty years. The homes here are mostly older single-family and manufactured properties on tight, canal-adjacent lots in the 33317 ZIP, and the gates on them lean utilitarian: light-duty aluminum, chain-link, builder-grade hinges, rollers that have seen better decades. We focus exclusively on gates, so when you call (855) 382-0732, you’re talking to someone who knows exactly what your Broadview Park setup looks like before we even pull up.
Why Broadview Park Homes Are Different
Broadview Park is a densely packed, unincorporated Broward County mobile-home and single-family enclave just east of the Turnpike. Properties sit behind driveways, canal-adjacent lots, and small fenced compounds that almost all rely on aluminum slide gates and driveway swing gates rather than ornamental iron. That means the gate work here is practical, security-first repair on aging light-duty hardware: rollers, tracks, chain operators, hinges. Not decorative estate-gate fabrication.
The climate does the rest. Year-round humidity, heavy summer downpours, and salt-laden air off the nearby coast accelerate rust on hinges, rollers, and chain operators. Frequent lightning storms stress electric openers and control boards. And driveway gates on the canal-side and tight-corner lots are prone to sinking posts and misaligned tracks after the heavy wet-season rains. Re-plumbing posts and re-hanging sagging swing gates is routine in Broadview Park, not a one-off. Miami Gardens Gate Repair has served Broadview Park since 2012, and the typical job here starts with a post that has settled or a track that has drifted out of square.
Styles & brands we work with
Our Main Broadview Park Services
Most Broadview Park homeowners call us for one of two reasons, and both are covered here.
Gate Repair in Broadview Park
This covers the mechanical side: bent hinges, corroded rollers, chain operators that have stretched or jumped, slide gates that bind on a misaligned track. On Broadview Park’s older aluminum and chain-link gates, the failure is almost always wear plus rust plus a post that moved. We re-plumb posts, re-hang sagging swing gates, replace rollers and tracks, and get the gate opening smoothly without pretending you need a full replacement. See the full breakdown at Gate Repair in Broadview Park.
Electric Gate Repair in Broadview Park
When the gate won’t open, opens halfway, or reverses for no reason, the problem is usually the operator, the control board, the loop detector, or the access system feeding it. Lightning storms in this part of Broward County stress control boards, and humid salt air corrodes wiring connections faster than the national average. We diagnose the system, not just the symptom, across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Details at Electric Gate Repair in Broadview Park.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Broadview Park
Most Broadview Park gate installations replace hardware that was installed decades ago, often as part of the original builder package or a weekend DIY job. Between the rust, the settled posts, and the near-constant humidity, the old gate is usually beyond patching. A new installation here means addressing the post foundations before anything else, because Broadview Park’s sandy, wet-season soil shifts and the canal-adjacent lots drain poorly. We install the gate, the operator, and the access system as one project, and we quote the full price before any work starts. See how we handle it under Gate Installation.
Automatic Gate Installation
Signs you need it
You’re manually dragging a gate open every day, or the existing operator is dead and the gate was never built for automation in the first place.
What it costs in Broadview Park
Automatic gate installation in Broadview Park typically runs $2,500 – $6,500 depending on gate size, operator type, and whether we’re replacing the posts.
How we do it
We set or re-set the posts, hang the gate leaf, mount the operator, run the power and safety loops, and program the travel limits and remotes.
Sliding Gate Installation
Signs you need it
Your existing slide gate drags on the track, jumps the rollers, or the floor-mounted track has rusted so badly that the gate binds every few feet.
What it costs in Broadview Park
Sliding gate installation in Broadview Park typically falls between $2,800 and $7,000, with heavier or longer commercial-style slides at the upper end.
How we do it
We pour or repair the track foundation, set the roller assembly, hang the gate, align the track, then install and program the chain or rack-and-pinion operator.
What Gate Installation Costs in Broadview Park
| Item | Typical range in Broadview Park |
|---|---|
| Aluminum driveway swing gate, single leaf | $1,800 – $3,500 |
| Aluminum slide gate with track | $2,500 – $6,000 |
| Operator and access package (residential) | $1,200 – $3,000 |
Do I need a permit to replace a driveway gate in Broadview Park?
Unincorporated Broward County typically requires a permit when the gate is automated or when posts are set in new concrete, and we handle the paperwork as part of the installation. A basic like-for-like manual gate swap without new footings may not need one.
How long does a gate installation take in Broadview Park?
Most residential installations take one full day. If we’re replacing posts that have sunk in wet-season soil or shifting a gate layout on a tight canal-side lot, plan for a second day.
Brands We Service in Broadview Park
We work on all the major gate-operator brands, but in Broadview Park we see a lot of BFT, Linear, Viking, and Ghost Controls units on older automated gates. If a board fails on a BFT or a Viking operator won’t respond, we can usually source the part and have it running the same week. Check our brands for the full list. Home is where you’ll find our other resources.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Broadview Park, FL
| Service | Typical range in Broadview Park |
|---|---|
| Aluminum gate repair, single leaf | $180 – $380 |
| Sliding gate roller and track repair | $220 – $450 |
| Driveway swing gate re-hang (post re-plumb) | $300 – $600 |
| Electric opener diagnostic and repair | $150 – $400 |
| Control board replacement | $250 – $650 |
| Automatic gate installation | $2,500 – $6,500 |
| Sliding gate installation | $2,800 – $7,000 |
| Aluminum driveway swing gate, single leaf | $1,800 – $3,500 |
| Operator and access package (residential) | $1,200 – $3,000 |
What pushes a Broadview Park job up is usually the post. Settled posts on sandy, wet-season soil mean we’re re-plumbing and re-pouring before the gate goes back on, and that adds a few hundred. You’ll get a written, itemized price before we start, and that price doesn’t change unless you approve something in writing.
Neighborhoods We Serve in Broadview Park
We cover the entire 33317 ZIP in Broadview Park, from the canal-side lots to the tighter streets east of the Turnpike. Response time for repair calls is typically same-day when you reach us before mid-morning.
- Broadview Park central residential streets
- Canal-side lots along the drainage ways
- Tight-corner lots east of the Turnpike
- Manufactured-home blocks throughout 33317
Service Area – Cities Near Broadview Park
Our service territory extends beyond Broadview Park into the surrounding Broward County communities. We regularly handle repairs and installations in Fort Lauderdale, FL, Plantation, FL, Broward Estates, FL, and Lauderhill, FL.
Serving Broadview Park, FL — Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Broadview Park
For a gate that’s stuck open, stuck closed, or posing a security issue, we schedule same-day service when you call before mid-morning. Broadview Park’s small footprint inside 33317 means we can route a technician through quickly for emergency mechanical or electric repairs. Call (855) 382-0732 and we’ll tell you the actual arrival window.
Broadview Park is mostly unincorporated Broward County, so there’s no single HOA governing the whole area, but individual manufactured-home communities set their own standards for gate style, height, and automation. If your lot falls under a community association, we install to whatever written spec they require, and we’ll flag any conflict before work starts.
Yes. We’re a gate-only shop, so the same technician works the hinges, the track, the operator, the control board, and the access system in one visit. You won’t get a handoff between a fencing contractor and an electrician, and you won’t get two invoices for one broken gate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broadview Park Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jennifer Bennett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rafael Garcia"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Maria Martinez